Switching

Dear All;i have CISCO Catalyst 4510R configured in my company. i just added WS-x4306-GB module. Fiber terminates in this modules. please help me how to monitor and check that module.i will wait for your kind reply

Dear,I have 600 pcs in my network.I have isa. I want to improve my internet only 5 to 6 pcs.I have 3750 & 2960 & 2950 & vlan & Isa 2004 server & 1721 Router.It's possible.

Hello all, Is it possible to setup a forwarder via domain name as opposed to i.p addressing? For example, any traffic destined for example.com forwards to 192.168.0.1 Is this possible? Thank You

Will there be plans to support it in the future?TIA

Hi,We had recently got 5 nos of 2960G-24TC switches...the problem we are facing is that when I try to connect the uplink port of one switch with the uplink port of other switch using a straight through CAT-5 utp cable (manually crimped) it doesn't sh...

Hi folks - I'd be grateful for your advice on which Cisco switch and other componets would be right for me. I'm a newbie to Cisco products. I've been down the hopeless Netgear route - but I need to get serious!I'll have a Cisco engineer to install - ...

Here's config...interface FastEthernet0/10switchport access vlan 10no ip addressspanning-tree portfastinterface Vlan10description cust2ip address 1.1.6.37 255.255.255.252ip access-group inbound inip access-group outbound outinterface FastEthernet0/11...

Hi everyone,I wanted to get everyone's opinion on using VLAN 1 as a management vl or creating a seperate Management VLAN and not use VLAN 1...Pro's? Con's ?

what is meant by ethernet1/0/12

6513 core switch with MSFC 15 and 16 configured with Inter-vlan routing and static routes to internet.I want to setup a wireless guest network on school wide network and limit only web access in and out to port 80. I want to create a guest vlan with ...

some times my router that is cisco 2811 itself reebooting, what is the problem plz. give good solution.Regardsnaidu

hi alli would like to traceout the ip address by the switch port, can anebody tell how we can traceout.

hello i'm a bigginer on cisco world.i don't know how to configure a vlan by subnetwork without associating a specifique switchports to vlan on catalyst 4503.pls help.

I have a cisco 827 and have make a static ip nat for intern webserver from the internet. This works great but if i want make a connection from my inside network to the webserver on the inside netwerk it doenst work. - I have no intern DNS server- Sli...