Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...
Forum Posts
Hi all, im im implementing hsrp and I have 2 subnets that need to use it am I best using 2 groups here and have both routers active, 1 in 1 group the other in group 2 ? and do I have to use multiple groups for that ?
I am getting the following error when I start debug on the switch."CPU Interface 0 storage notify failed on queue 1"Cisco Internetwork Operating System SoftwareIOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.3)WC(1), MAINTENANCE INTERIM ...
Does anyone know if it is possible to go back to the Cisco IOS without Modularity if you have already installed the IOS Modularity on a 6500. I haven't seen anything in the documentation, but I think you could just boot off a new image and delete the...
Dear all,I'm currently having a 4510R running IOS and 2x 6006 running CatOS. I had trunk the Gi1/3 & Gi2/3 of the 4510R to the 1st 6006 mod 3 & mod 4 and the Gi1/4 and Gi2/4 of the 4510R to the 2nd 6006 mod 3 & mod 4. Gi1/3 & Gi2/3 are in port channe...
Hi all, Is it general rule of thumb to have no more than 254 hosts in a vlan ? whats is the recommendation ?
I have a site to site VPN over a DSL. My DSL line terminates on an 877 router on the one end and a pix 506 on the other end. I have a site-to-site VPN from an ASA on the other side of the 877 and the 506. I have having problems running certain applic...
Resolved! 4510 loop rebooting need help!
We've got 2 catalyst 4510, during the week end one of those crashed badly, it keeps rebooting in loop. I've tried the solutions on the cisco's web site but still can't solve my problem. I tried in rommon mode (wich is the only thing I am able to us...
HiWhat is the subnet for the host IP address 172.16.210.0/22?Could somebody show me how they worked it out.ThanksDan
the client had two Nortel 8610 Passport switches; they are adding two Cisco 6509 on a new site thru metro ethernet links. Site A Site B Nortel 8610 ----- Cisco 6509 | | Nortel 8610 ----- ...
HiiCan any one tell me what is the difference between CatOS & Cisco IOS.Or can both OS works together in single switch.Thanx
Hi all, can anyone tell me why we would want to subnet a class A address ?
hello,i have configured a cisco router 2811 who is connected to switch 3550 in F0/1 by his G0/0 interface. i configured 2 dhcp pool in the router.whene i put the ipPhones in the switch, they can have an ip address via the Voice pool, but the Laptop...
Hello,I am pretty new to Cisco so please bare with me.I am setting up a 4506 switch w/ a sup IV as a core switch with 5 Dell 3348 Switches as my access points.I intend on trunking each Dell switch to the one of the Cisco ports obviously with dot1q.As...
can someone pls help me to configure switches and router seen on the attached figure? all computers in the figure must ping each other. L3 switch is OSPF capable but no specific routing protocol is requested. tx in advance for helping.
I am being enticed by the simplicity of applying Cisco SmartPortconfigurations to all my switchports to "improve" network performance.Does anyone have any experience with using Desktop SmartPortconfigurations at the access switches?
