Activity in Technology and Support
WLC 9800-L version 17.12.4 and Microsoft surface connectivity issue
Hi,I successfully migrated from Cisco Airwave OS to 9800-L IOS versoin 17.12.4, and everything is working fine with the exception of the Microsoft surface pro. All of my PCs (windows 10) and Apple Iphone devices are working great and they are using ...
Modifiying FTD instance on FTD3130
Hi,We want to remove a sub-interface assigned to a running instance in our FTD3130. We have already disabled it inside the instance and now we want to deassociate it from the containter inside the chassis. Does this requiere a restart of the instance...
Upgrade 7.6 -> 7.7 stopped media and ftp, is inspection the culprit ??
Hi to all,after upgrading from 7.6 to 7.7 RTP traffic as well as FTP stopped working. I disabled media inspection with flexconfig and media started working again.Now our users complain about problems with ftp.I suppose that if i disable ftp inspectio...
Resolved! CUC 15 Unified Messaging
Hello All,Is there a way to added/append a user extension in Unity Connection 15 Unified Messaging that is in addition to the actual number (1??????????). Thanks.
Testing Internet Access Policies in Secure Access Dashboard
Hey Techies,Is there a way to test Internet Access policies within the Secure Access dashboard?I'm looking for something similar to the Policy Tester feature in Cisco Umbrella, which allows us to validate WEB/DNS policies.Appreciate your guidance—tha...
How to Deploy Cisco Umbrella JSON and XML Files via Intune
Hi Everyone,I’m currently working on deploying Cisco Umbrella on multiple Microsoft OS based endpoints using Microsoft Intune for posture assessment. I have the required OrgInfo.json file and ConnectionData.xml, and I would like to install these file...
CISCO2901/K9 %PLATFORM-3-PIP_ERR
Good day All,I have an old 2901 SW and I noticed scrolling in the logs:*Jul 16 14:19:10.135: %PLATFORM-3-PIP_ERR: PIP error reg 0x00000080*Jul 16 14:19:15.247: %PLATFORM-3-PIP_ERR: PIP error reg 0x00000080*Jul 16 14:19:20.463: %PLATFORM-3-PIP_ERR: PI...
Understanding MST Convergence
Hi All, I have the following setup in CML: SW1 is the Root BirdgeI have VLANs 1-20All Switches have the same MST configuration and running in the same region. When I shut down interface gi1/0/3 on SW3 the MST environment converges and uses Gi1/0/6 a...
CISCO CBS110 Unmanaged 5-port for NAS storage connection
Good day,if possible I would like to ask for help with choosing switch. I want to connect two NAS storages, but have only one cable, so I want to buy a simple unmanaged switch for being able to connect them both.I found CISCO CBS110 5-port switch (CB...
ISE on AWS returns "name resolution failed" after deployment
I'm trying to turn up a test instance of ISE in AWS, and I'm getting this "name resolution failed" message when trying to connect to the GUI either through the IP address or the DNS name I set for the elastic IP.Is there a step I'm missing where you ...
cannot create directory `.CLEANUP_IN_PROGRESS': Read-only file system
Cisco 4321 ISR running Cisco IOS XE Software, Version 03.16.01a.S - Extended Support ReleaseOn boot I get this error %FLASH_CHECK-3-DISK_QUOTA: Flash disk quota exceeded [free space is 1495100 kB] - Please clean up files on bootflash.So i thought i w...
Custom ringtones with Yealink SIP phones and CUCM 10.5.2
Good day, I encountered such a problem. When using Yealink phones via SIP protocol on CUCM 10.5.2, I cannot change the ringtone of incoming calls on these phones. I change the global ringtone of incoming calls in the device settings, I change the rin...
Nexus-vrf-route leaking
Hi, ☺️Now i still read about this tooic and i do lab environmentOn nexus 9k :I create two vrf for each vlan for isolationBut i want each vrf access internetFor each svi vrf---Vlan10,20----(trunk)Switch-N9k(ip10.10.10.2)-------(10.10.10.1)Router---int...
Unable to change password on vManage after attached template - 20.12.5
Hello community,So I ran into this problem where I have my default admin password and never changed it. On the GUI I always had a warning about using the default password. I tried to change it before but for some reason, I couldn't, so I just ignored...
PKI FlexConnect Authentication
Hi, I am looking for a guide on how to get certificate working with Cisco C1111-4P (code 17.12.5a) I am trying to get ECDSA certificates working to authenticate over the FlexVPN instead of PSK I think my first question is, is it supported and what si...
| User | Helpful Count |
|---|---|
| 91 | |
| 83 | |
| 74 | |
| 70 | |
| 65 |
