Activity in Technology and Support
Reuse CLI Template Variables outside for loop
Hi Community, is it possible to reuse a Variable that has been set inside a for loop after the loop ended? {% for interface in __interfaces %} {% if something matches %} {% set MyVariable = "This is a Test" %} {% endif %}{% endfor %} {{ MyVariab...
Setting MTU on C9300
I have a C9300-24T which needs to have its IOS updated. Its currently running v16.12.4. In the meantime, i need to set the MTU size on a switch interface. The usual "mtu xxxx" and "ip mtu xxxx" commands appear to be missing/invalid. Do you know what...
Cisco ISE posture policy match orders
When defining a posture policy, if we have 3 separate policies with the same conditions {id group, operating system, other conditions}, one with requirements for AV and one is Anti-spyware and another one is Anti-Malware. It doesn't have to meet al...
Issue with hostname display on Catalyst 8000 Always On
Instance Catalyst 8000 Always-On Sandbox-20250711T11572326First time user of the Catalyst 8000 Always On today. The sandbox fired up quickly, no issues there.The hostname displayed on the left side by my login credentials (sandboxiosxeaotest.cisco.co...
Overlapping External TEP IPs on loopbacks within a Multi-Pod
Hi guys,within my Multi-Pod (2 Pods) environment I got an overlapping IP which belongs to the external TEP-Pool from Pod 2. This fabric is not in production yet.Informations:external TEP-Pool Pod 2: 172.20.12.0/24Data Plane IP: 172.20.12.1Spine 221 I...
Cisco Room Bar Touch Panel Required Issue
We have a Cisco Room Bar with the Navigator Touch Panel that is using connection mode through the network instead of direct connect. It works perfectly and there are no errors. However, we are receiving issue notification indicating that a "Touch Pan...
How to clear Fault 1394 (port down, used by Fabric)
Hi community,I try to clear Fault 1394 (Port is down, reason:sfpAbsent(connected), used by:Fabric) by temporarily setting the Fault severity to squelched. This fault message is a result of moving the Leaf Uplink cables to a different port. I go to Sy...
mac-flap; limit or tuning?
Any know how many times w/in a time frame a mac address needs to show up on two ports before a mac-flap error is logged? And is there a way to tune that threshold?We're running some ap's in flex mode, and a few handheld clients are roaming between a...
FTD Sub interface Live Traffic monitoring via FMC
Hi Guys,I have now completed the migration from ASA to FTD 3105, which is being managed via FMC. Is there a feature in FMC that allows live monitoring of sub interface traffic? I can see monitoring options for physical interfaces, but sub interfaces ...
Route incoming PSTN calls to different targets based on area codes
HiWe are using Webex Calling with a local CUBE as the voice gateway.Currently, all incoming PSTN calls go through a single Auto Attendant, which then forwards the calls to one Call Queue with four members.We would like to change this setup so that ea...
ASA Upgrade from 9.10(1) to 9.20(3) on ASAv – Best Practices
Hello everyone, I'm planning to upgrade our Cisco ASAv from version **9.10(1)42** to **9.20(3)20** directly. Current environment:- **Platform**: Cisco ASAv (virtual appliance) Questions:1. Is a **direct upgrade** from 9.10 to 9.20 supported and sta...
Resolved! CML 2.9 tacplus container - are the TACACS logs viewable?
I launched a tacplus container and it's working great. The tac_plus.conf file contains the line accounting file = /var/log/tacplus-acct.log But since this is a container, we don't have access to the file system. Or is there a way to access the logs?
Supressing Cisco Secure Client Downloader Popup Window
Hello Cisco Community,we installed the Cisco Secure Client on our clients. For automatic updates the client starts "VPNDOWNLOADER.EXE" in the background, which was blocked by AppLocker. After creating a policy to allow the execution, the update shows...
POE loss on Cisco 9300
We have experienced several switches losing all Power over Ethernet (PoE) functionality, which resulted in a complete loss of VoIP service within the affected building. Despite this, POST and all hardware indicators display normal operation. Are ther...
Cisco Catalyst 9300 Switch Rebooting unexpected
Hi Team,We are having one switch which from Cisco Catalyst 9300 Series, its rebooting unexpectedly.Image (Version)17.3.6Please help me to resolve this issue.
| User | Helpful Count |
|---|---|
| 105 | |
| 93 | |
| 91 | |
| 76 | |
| 69 |
