Activity in Technology and Support
Configuring custom media files for Music On Hold
IntroductionConfigurationRelated Information Introduction This document covers the procedure to Configure the Custom media files for Music On Hold feature in Cisco Unified Communications Manager (CUCM). Configuration To add a custom Music On Hold au...
Catalyst c9200 monitored with Meraki dashboard
Hi,I am planning to monitor a bunch of c9200 witches with Meraki.They are currently running catalyst software some 16.12 and some other 17.3.I will upgrade the 16.12 to 17....something.What the documentation is not clear about is:If the catalyst hav...
Networking Graduation Project
Hello,As a senior networking student, I am currently planning my graduation project and would greatly appreciate your guidance. I am looking for a unique and innovative project idea that combines networking, security, and, if possible, some programmi...
Resolved! selecting second line for outgoing calls by default
Hi,when we make out going calls, i want to select second line by default. plz suggest me where i s the settings to be changed in call manager.Regards,Baskaran.M
Forward not answered calls to Call Handler
If I have the no answer forwarding target set to the Call Handler extension, the voicemail greeting of the called extension is heard. The only way so far I was able to route the call to a Call Handler was to set the greeting to 'Nothing', then After ...
Improving your experience Popup suppression
After the last Duo desktop update on Mac and Windows devices, our users are getting a pop up: Improving your experience.....Data collected is only used by Duo... The options for the user is to "Torn off" or "Continue". when selecting Continue afte...
Resolved! Cisco Catalyst 9800 WLC – Separate Local User Authentication
We would like to request your assistance with the configuration of Guest WLAN authentication on our Cisco Catalyst 9800 WLC.RequirementWe have two separate Guest SSIDs on the same WLC:Guest-AGuest-BBoth SSIDs need to use the Local User Database on th...
Symmetric IRB behavior with Route-Target L2 and L3 VNI
In VXLAN EVPN networks, Inter-VNI (inter-subnet) communication is performed using IRB (Integrated Routing and Bridging) functionality. Without this feature, a dedicated L3 device would be needed to perform inter-VNI routing. This concept is similar t...
Designated Forwarder in VXLAN EVPN Multi Homing
In VXLAN EVPN Fabric, The Designated Forwarder election through BGP Route Type-4, is used for two purposes: -VXLAN EVPN Multsite Architecture between Border Gateways. -VXLAN EVPN Multi Homing between Leaves, similar to VPC. For both use cases, this m...
Applets on Cisco devices
I teach Netacad CCNA level courses and a problem we run into is with 4 or 5 courses sharing the same hardware, students will use dumb passwords, forget them, & then we have to do the annoying romon fix.I researched setting up an applet that would del...
Migrate FPR 2100 to FPR 3105
I am trying to migrate FPR 2100 FTD to FPR 3105 FTD. Both of them are managed by the same FMC. The FPR3105 has only one configured interface: the management interface. When I use the migration from the FMC, it fails after mapping the interface. Any r...
Nexus switches console on devnet sandbox
I try to run nxos9000 on CML lab but after booting node console is not working.
Static route via an Interface in Another VRF
Hello, everyone.I have a router with the following interface:interface GigabitEthernet2 vrf forwarding CUST-ONE ip address 192.168.11.1 255.255.255.0 ip ospf network point-to-point negotiation auto no keepalive no mop enabled no mop sysid endI...
Don't use Cisco Catalyst C1300 series as a layer 3 switch
We have had 3 different issues on 3 different switches in the C1300 line cause the switch to lose its mind and stop routing at different clients. Cisco TAC helped us figure out the root cause to each of these issues. The root of the problem seems to ...
Get agent status from script
HelloI am writing a script where a call must be connect to a specific agent. So customer calls a specific number and from the number I have to find the agent name. This is possible with the GetUser step from the script, I have the called number, and ...
| User | Helpful Count |
|---|---|
| 131 | |
| 76 | |
| 72 | |
| 61 | |
| 43 |
