TelePresence and Video Infrastructure

Resolved! Map differrent number to an inbound caller id

Dear all,I hope someone can help meWe use internaly VOIP and exetrnaly we have a PRI lineWe have a Cisco 3725 voice gateway and two Cisco Call Manager 5.1.I would like to know if it is possible to map a different number on an inbound caller id .Exem...

recording the Audio portion of a Video Advantage Call

Does anyone know of a solution to record the audio portion of a call between 2 IP phones with VT Advantage? We have voice recording through verint. When we set up VTAdvantage and call, the verint recorders get start and stop signals, but no audio. ...

SIP setup with Media5-fone and CUCM7

I think I have configured it all correctly and I have viewed the netcraftsmen website but it differs a little. When I run a sip trace from Media-fone5 i see an error : Warning: 399 (CUCM name) " Line not Configured" I can not find out what line need...

Upgrade from CCM4.2 to CUCM8

Hello, everyone. The company is considering to upgrade our CallManager 4.2 to CUCM 8. I have some questions: 1, should I upgrade the current unity 4 to Unity connection 8? Is unity 4 working fine with CUCM8? I am asking this because we think this ca...

Cisco Unified Camera on 9971 - Intra-region calls falling back to audio, inter-region worksCisco Unified Camera on 9971 - Intra-region calls falling back to audio, inter-region works

I have a small callmanager 8 setup with 9971 cam phones and 3rd party conference room VTC kit. Last week I set up mobility & SNR for my users. I've noticed since then that calls from the 3rd party VTC kit to the 9971s work perfectly with video, but c...

2 port VWIC-2MFT-T1 clocking issue and slips

Hi,We have had an imense amount of problems with faxing from our network. We were able to determine it was clocking issue and we attempted to resovle it by synching the clocks.We have 3 T1 pri’s from two different providers. Two t1’s are from TW ( t...

RE: POTS-to-any and any-to-POTS connections are enabled

Hi,First post here. Thanks for the assistance.On http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-h323h323.html , it indicates this comment "Note H.323-to-H.323: By default, H.323-to-H.323 connections are disabled and POTS-to-...

Unmapped Exception Error on VG224

Got unmapped exception error on vg224 with The content of elements must consist of well-formed character data or markup...How can I fix this problem other than fix it within the secure shell on cucm 7.1??

EX90 over VPN to Codian MCU

We have a home user using an EX90 connecting to our network via VPN. The user's bandwidth at home is about 1Mbps. When the user makes a direct call to another EX90 or to a C40, the call is clear. Whenever the user calls into the MCU, the video qualit...

Resolved! Is it possible to configure loopback interface as source ip for dialpeer voip?

Hi everyoneI am wondering if anyone can help me. I am trying to establish an FXS PLAR connection between the two sites. Everything works fine if the remote router knows the route to the network of outgoing interface of the local router but unfortunat...

SIP Invite showing private IP

I'm having an issue with out going sip traffic showing my private IP in the header instead of the public IP. I have a cisco asa 5510 and everyone seems to think the issue resides on the firewall.Any help would be appreciated.Thanks,Joe

Unified Video users not able to make local calls

We have an odd issue with our Unified video Advantage users. If the video is enabled on their phones, they are not able to make local calls. They can receive calls just fine and make internal calls, but no external. When the video is disabled, all th...

setting up NTP on the VSAA laptops

HiFor some reasons I am having issues setting up the NTP settings on my two laptops which are being setup for VSAA.Its been set up in the system>administrator as a local ip address of 127.0.0.1I am going to the correct path of/usr/local/mtaa/bin/ntpc...

3 way calling sound like underwater

I have an office with a 2811 voice gateway and 2960 switch and 5 7942 IP Phones. When the manager is on a 3 way conference call which he originates from his IP phone the callers on the remote end say he sounds like he is under water. They have a full...

T38 Faxing to Call Manager 7.1

So in my environment I have Call Manager 7.1, with a PRI gateway configured for MGCP.Recently a fax server (FAXCOM) was deployed and when setting it up I originally thought I would just terminate the H323 T38 fax calls (used for outbound only) on the...

TelePresence and Video Infrastructure

Forum Posts

Resolved! Map differrent number to an inbound caller id

recording the Audio portion of a Video Advantage Call

SIP setup with Media5-fone and CUCM7

Upgrade from CCM4.2 to CUCM8

Cisco Unified Camera on 9971 - Intra-region calls falling back to audio, inter-region worksCisco Unified Camera on 9971 - Intra-region calls falling back to audio, inter-region works

2 port VWIC-2MFT-T1 clocking issue and slips

RE: POTS-to-any and any-to-POTS connections are enabled

Unmapped Exception Error on VG224

EX90 over VPN to Codian MCU

Resolved! Is it possible to configure loopback interface as source ip for dialpeer voip?

SIP Invite showing private IP

Unified Video users not able to make local calls

setting up NTP on the VSAA laptops

3 way calling sound like underwater

T38 Faxing to Call Manager 7.1

Meet and congratulate the February 2023 Spotlight Awardees!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Cisco Codec Pro Question

Recording p2p calls on Codec pro

CS-Codec-Plus V01 # TCC7-25 compatibility with Polycom RealConnect

CMS 3.3 Webbridge LDAP user login issues

FN - 72497 & 72517 related to Cisco Room Navigator

Expressway zone not responding- inbound TLS negotiation Error

UNLICENSED STATUS ON CMS WITH CMM

Cisco Webex MS Teams video calling (VIMT)

Quad Camera Power Supply part number?

Audio distortion from a cisco webex codec pro