TelePresence and Video Infrastructure

Hi!We have a router configured with the IOS firewall/IOS IPS and one-on-one NAT. Everything works OK, but one function...When you start an H.323 session to the Codian MCU from the internet, a menu is presented that shows different conferences to join...

How can we simply record the live TelePresence session (between CTS and CTS)? Then we can playback it on the PC,

Hi all,i've configure tandberg 6000 to use leased line E1 (not PRI), i have followed the setting in user manual, but i still can't make a call either video nor audiousing auto or isdn, the leased E1 setting in T6000 is auto. link status is connected....

Dear All,I am new to UC 520 Call Manager Express and Cisco Unity Express. I would like help in solving the following problems encountered during the config of the latter:1. Call Transfer- When I transfer a call, I need to know if the other person to ...

Hi,I have few CTS end-points( Location : UK) configured with Date/Time group as GMT (+ 0:00) in  CUCM. One of the end-point is showing the time which is GMT , rest all other end-points are showing BST(GMT + 1) ,though they are also configured with GM...

This should be a quick question.I have new VCS pair that arrived with 6.0 installed.I upgraded the VCS Controller to 6.1 without any problem.When I started to upgrade the Expressway, it asked for the release key.  Can I simply copy the Release key th...

I have a Cisco 7945 with a headset.  Because one ear is deaf, when I cover my good ear with the headset or with the handset, I cannot hear my own voice in my good ear. It sounds like I am talking underwater which is really a terrible feeling and not ...

Hello, i have i quite strage problem on one of my customers locations: we have a cucm 7.1.5(SU4) with the cucm in the datacenter. And we have a small location(branch office) which has a small wan connection to the datacenter (1MBit/s). In this locati...

Hello friends,I have a CUCM in a branch office and the billing server in HQ and communicate via FTP, but this connection is down for more than 15 days.....can I retrieve/recover the information of that 15 days.Thanks a lot

How to Stream video by  using PVC2300

Hi, i have MXP6000 with 9.1 software. Cant make it register with SIP. No single packet comes from MXP to server.Has anyone been able to make it register with SIP server?Config is quite simple:xConfiguration Conference SIP URI: "6000@10.96.37.10"*c xC...

We recently upgraded our VCS to X6.1.With Movi 4.1, when logging in, the presence defaults to 'appear offline' when logging in no matter what 'sign me in as' is set to. I can change the presence status without getting any error messages, but the upda...