TelePresence and Video Infrastructure

Hello All,I have a media server which runs IVR connected to Voice gateway. Media server runs on SIP and cisco 2811 is configured as SIP gateway. Gateway Connects to E1 pri for DID. I have a problem with voice quality. When we call,gateway redirects t...

Hi,Im planning to buy an 1841 for one of my remote site. We are planning to hook in their PABX system to talk to our system at our HQ. Would someone help me to determine which cards an IOS version should I get ?Thanks

We are going to implement, new softswitch- (true VoIP) solution will use the Cisco PGW2200 for the ACD..it will run on SUN NETRA using solaris 10. the solution has many components, the AS5400XM gateways, the Cisco software which will run across WIND...

Hi all.We have a cisco 2851 with a VWIC-2MFT-E1 interface and 2 pvdm2 64. We have also a sony video station registerd (sccp) on our Callmanager (4.2).We are trying to receive a video call from a remote H320 video station.A show voice call summary on ...

Does anyone know how I can retrieve sip firmware and load it on the 7960G Cisco phones? I have never done it before. Also I am looking for CCVP workbooks/labbooks does anyone know how I can get them? I ahve already bought all the Cisco Press books?

Hi,I am trying configure Cisco2821 for ISDN video using E1 PRI. I have looked into the documentations and configuration looks ok. The only thing I do not understand is how to configure 'voice class called number inbound/outbound' for secondary called...

We have CUCM 7.0 , 2821 Voice Gateway, IP Phones 7975, 7945 and Video Adv.Also we have existing Polycom ViewStation FX Can I integrate Polycom ViewStation with my existing CUCM 7.0 network ?Can I have video calls between Cisco Phones / Video Adv. and...

Hi,I have 186x series router with build-in four FXS ports. When I call FXS port (SCCP IP Phone through H.323), I get connected to GSM GW; when I disconnect by IPPhone the line is still busyConfig:!voice-port 0/0/3 no supervisory disconnect lcfo no ba...

Hi Folks I have Communications system which uses 4 wire for Receive and transmit the system is a dedicated or always on. We mistakenly bought E&M interface because we wanted to use it the four wires for voice transmission. In this case we see no nee...

G'dayI have been approached by a customer to provide multipoint capability to for their Polycom vc endpoints. They are also interested in having vc recorded and made available on a vod basis.I just wondered if someone could give me the suitable comp...

Has anyone performed an integration with Polycom VSX 7000e VSX8000 and CUCM 7.0?Just looking for info. I did see where Polycom has software for SCCP endpoint for rel. 6.1, but nothing for 7.0. Will this be an h.323 enpoint in that case?Thanks,

Hello!I have problem with VT Advantage when I try to use with the integrated webcam in my laptop (I detected the problem when I use XP or win2K). With Windows Vista, the webcam work perfect but with XP, the system crash and I need uninstall the CUVA....