TelePresence and Video Infrastructure

When fraud attempts come in to the Expressway, sometimes there is a Search without a corresponding Call Attempt.  From what I can tell, by default Call Attempts record the "Src-ip", but Search attempts do not. Is there a way to log the source ip addr...

How to Connect Cisco Table Microphone 20 and DX80??Dx80 Have only one USB Port ?Any Solution?   

Hi, We have about Cisco 100 video endpoints integrated to TMS 15.x .   At present, I am able to get the report from TMS which has system name, Serial number, IP address , Gatekeeper, SIP,version  etc.   But I need to fetch the details  like CDP, VLAN...

Hi,   I have installed CMS with recording, recorder in separate VM. Setup is done, callbridge also successfully connected the recorder, SRV record also mentioned in recorder.  Problem is when call connected to CMS Space, recording folder has been cre...

Hi - We've have a Room Kit that we moved from one vlan to another. After this move, the Room Kit seems to have lost connectivity. Tried a factory reset from the Touch10 in my efforts to get the device back to no avail. It currently report 'Invalid ne...

Hi,We have a Tendberg MXP 990 Video conferencing unit. It became faulty last month.Kindly guide how we can get it repaired. Best Regards,Muhammad Shaukat

I normally control Cisco Codecs through RS232 control. How do I enable IP control to control the codec through Crestron control?

Hi All, We have a Cisco SX80 and Crestron DIMS-300 with touchpad TSW-1050 integrated in a large meeting room. I did a factory reset on the TSW-1050 last time, but after that, i got a issue with secondary entry on audio only WebEx call. I can dial int...

Hi please i need brief on the below video conference featuresConcurrent Callers ( for example : 50 Concurrent Callers )Dynamic LayoutAuto FramingVideo CompositorPre-Set PositionDual Screen for Video and contentTwo Simultenous content sources and Supo...

Hi I recently implemented Cisco room kit mini as a stand alone, But i am unable to see others at VC end point side, But the others who joined in same meeting through webex they are able to see me and hear me. Later on had a demo 16 digit license and ...

We have Cisco CMS 2.3.7  Objective is to lock the meeting by host during  WebRTC meeting We have Call Leg profile with callLockAllowed=true parameter WebRTC page we could see "Meeting Lock" option. Once we clicked Meeting lock button.(turns gray) aft...