Hello,
We Just got our first SX80 with the intent to use it for SIP Voip dialing.
Thus far we have older tandbergs, C40s and SX20's but they are all stand alones using H323. We use a bridging service BlueJeans so thats the only thing we really connec...
SX20 DVI Input from Crestron DM Switcher DMC-HDO looses video with VGA source.
When using a HDMI source to a Crestron DM switcher and switching it to the Crestron DMC-HDO HDMI output the SX20 presentation video is fine. When we switch our source to V...
Hi Gentlemen,
I'm working with an engineer that is trying to get some specs in regards to the Precision 60 Camera using the Presenter option.
1. General camera question- Is there a distance limitation for the HDMI and the RJ45 cables that connect the...
We ordered VCS control and expressway . Against this order we received server UCS C220 M3 Server. I connected VGA on the server front panel and its asking login password. As I experience VCS and Expressway are separate units and we can set IP addres...
Hi
This information "We recommend a horizontal pickup range for the microphone of maximum 14 ft (4.3 m)" is the same for CTS-MIC-CLNG-G2 and CTS-MIC-CLNG-G1 ?
The scope of the microphone is identical between CTS-MIC-CLNG-G2 and CTS-MIC-CLNG-G1 ?
B...
Hello,
Doest telepresence PMP license works without TMSPE option key?
On the conductor we have 250 PMP
The vTS is activated, and use PMP license.
On the TMS, we the option for
- 25 Cisco TMSXE - and 50 system
no TMSPE.
So how to use the PMP license...
Hello,
There was a penetration test at the company and the tester said that there is a unencrypted traffic between CUCM - Expressway-C. The tester can see user credentials base64 information. So I checked Exp-C zones. I can see "Media encryption mod...
Hello I hope you are all well. I am in this horrible situation with CDW and Cisco to get technical support. I had recently installed a SX20 unit, upon installing I am getting an error message 404. What is this?
The codec will be connected via IP...
Howdy folks,
From time to time we need to switch a camera input from the web interface during a live call. We can do this successfully with an SX20 but with a new SX80 installation, the live source selection doesn't change inputs. Changing inputs in ...
Hello . customer want to have an offer for an MX300 in China and Australia. is it possible to have a 55" and 42" option for this product? can you please tell me the SKU# of both variants?
thank you very much
kind regards
daniela
We have an existing VCS C/E pair that is registering endpoints and handling B2B calling. We would like to add MRA, but I am wondering what the impact will be. Currently we have H.323 and 3rd party SIP devices along with Cisco devices registered. ...
Hi All Would need your advise on this I have a set of SX20 that is configured as a standalone device (No CUCM, VCS).Its work fine, able to make and receive call via IP address. The things is, during our Video Conference meeting, sometimes an unwanted...
