Hi All, I have been looking for the dimensions of IX5000 table for 6 people but i am unable to find dimensions of table, does anyone here help me out with this.
Hi All, I have been looking for the dimensions of IX5000 table for 6 people but i am unable to find dimensions of table, does anyone here help me out with this.
Could you please tell me if there is any possibility to invite one or several external endpoints (IP, URI) using TMSXE. Thanks.
Hi Everyone, We have a TMS server configured and running, with several manual list phone books. Now, I am deploying a new TMS and configuring everything from the scratch(don't want to use existing databases), including phone books. I have already re...
We use participant templates to add phone conferences to our video conferences. These templates are named "Voice Conf. 1, 2, 3, 4, 5, etc. Is there a way to get the TMS service email to list Participant Templates in a seperate section if a particip...
Need to switch main source for smoother video playback instead of sending as content. Have multiple SX-80s. Some I am able to switch the main source to the PC or Camera 2 input without issue, others, nothing. I can even see in the preview window for ...
hi alli have a problem when i reset factory SX20. i finished to turn off SX20, then hold the power button for 10 seconds until it starts blinking. Then press the power button twice. i don't know it have already been reset factory status yet.But afte...
This past week my team and I have run into deployment issues with a SX80 and MX300 G2 both running CE8.2.1 code. My endpoints register to CUCM 10.5.2 and I have default device loads configured for both products (7.3.3 for the sx80 aand 7.3.5 for the...
I have a Conductor with a virtual Telepresence Server, I have noticed that if the Conductor reboots that all active SIP calls on the Telepresence server also drops. As I understand it, all RTP traffic flow between the Telepresence Server and the End...
Hi Guys, I detected an issue with calling from ex-MOVI client to MCU - our client has one MCU´s VMR which is accessible from Internet for video calls. There is VCS-E (with dual NIC) routed to VCS-C (both 8.5.2) routed via SIP trunk to CUCM (10.5.2) r...
Good day all Can anyone supply me the pin out needed to extend the 12 x zoom camera control cable (network cable) when connecting to an SX20 with the break out cable SX20Breakout cable12x zoom cameraStraight HDMI cable (10m) Thank you!
Hi All, I have CUCM 11 and Lync 2013 on premise. I want to CUCM's client like jabber is able to make a call to Lync's client over video. Is that possible only with SIP trunk from CUCM to Lync Server and vice versa? Or we need to have another gateway...
Hello, I'm trying to upload the script to block all PSTN call hitting on Expressway E to avoid any misuse,however the script is not coming into effect. Attached is the script and please let me know if something is missed. This is manually uploaded to...
Good day! My name is Dmitry! Have Cisco TelePresence SX20 + VCS 8.2 server and Skype for business 2015. Is it possible to set up a conference call on SFB and to call on all subscribers of this conference ?. At the moment we can only call on one cust...
Hi Community, We have CUCM, Expressway Core and Edge deployed on the network for B2B calling. We have active SIP trunk between CUCM and Expressway Core but outgoing call from endpoint registered on CUCM cannot route to the SIP trunk and not hitting t...
Hi, We are currently testing certificates for Expressway Core and Edge. To give you an overview on the current setup, the Expressway Edge is deployed single DMZ (single NIC) and its IP address is NATed to Public IP. The Expressway Core is communica...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-11-2025 04:15 AM | ||
06-06-2025 12:26 AM | ||
06-02-2025 07:45 AM | ||
05-23-2025 07:20 PM | ||
05-19-2025 05:53 AM |
User | Count |
---|---|
2 | |
1 | |
1 |