sir, our sx20 system ask us for release key as attached photo, and we don't have it .
so please tell us what we can do. we need our system work again and we can't .
what we can do .
thanks
Dear
I installed SX20 camer, But i need additional information on how to connect to CMR or telepresence . What are the requirements like ip firewall configuration, ID needed or not to join the CMR, and how could i dial in from the sx20.
Hi Everyone,
How can i change display name on sx20/sx80. I want to use name in place of sip uri on the device screen.
Is there any way for this ?
Thanks,
Hey all,
How can I mute all participants on join using the Conductor & TelePresence Server? I know it will have to be a JSON command, but I can't get the combo right.
Also, is there a way to disable the *6 to unmute yourself?
Thanks,
Justin
Hi ,
I have got DX70/DX80 Phones registered to Cisco Call Manager.
My query is that : can we extend the video output of DX70/DX80 to Sony/Panasonic LED screen on HDMI port?
regds,
aman
Hi Team,
Here is the pop-up message displayed on my computer, when I have opened the Proximity Icon:
Error code AUDCLNT_E_UNSUPPORTED_FORMAT
The microphone format is not supported
The microphone on your computer doesn’t support 44.1kHz or 48kHz.
C...
Hi all,
We're facing a weird problem: we can dial to external phone numbers from all endpoints, except a MX800.
Video endpoints are registered to VCS X8.2.2. From VCS there is a SIP trunk to CUCM. I unfortunately don't have a lot of VCS knowledge....
Hello,
Is there an easy way to migrate the configuration of a VCS appliance to a VM? Can you restore from a backup of the appliance?
I know how to migrate the licenses already, but I'm not sure about the configuration itself. I'd really rather not...
Hi all,
i am newbie here, i have Telepresence server 4.2, conductor CX4.1 and BE6k from last year purchased, and use screen license.
please share any deployment guide for this, i got document guide use SMP and PMP only.
thanks
ucok
We have cisco sx20. Our requirement is simple. We want to have the content sharing and client's side video side by side. Right now, when we do the content sharing, there is no space for client's end video. Is it possible to have content sharing in on...
i have video conference units which operate as standalone "isnt registered on vcs or cucm" and natted thorugh firewaal using a public ip address, my problem is sometimes calling other parties isnt successful or sometimes there is no video or no audio...
Hi Community,
Just a quick questions, we have video endpoints registered on CUCM with their SIP address as extension@CUCM_IP_Address format.
For example 9700@10.1.1.100 SIP address of endpoint. We have Expressway Core + Edge in the network and want t...
Dear All,
I am not able to book this exam (500-005 TX9KMAN). It is also not a retired exam. Do we have any replacement for it.
Regards,
Rajinder Parsad
We have a C40 CODEC with the 7.1.4 software. The system has two cameras but one of the cameras is rarely used. This cam is connected on a remote wall plate.
The system has been poping up a message "lost connection to camera". I thought if we plugged...
