TelePresence and Video Infrastructure

I've been asked to troubleshoot why an old VSX5000 is unable to connect with our cisco endpoints.  I am thinking the only issue is that the VSX5000 is only capable of dialing IP numbers, and not URL or IP##alias. I am not able to confirmation of this...

First, customer cant go to TMSPE for a bunch of reasons, at least not in the short term.Going to System > Provisioning > Directory  Getting Error connecting ro the local LDAP server   the specific base DN cannot be found, please enter a valid base DN...

Hi,I am new to Cisco Video world. I just want to know the contents of Cisco Video which makes video over IP complete.Like in Cisco Voice, There must be Call Agent (CUCM/CUCME), Gateway (Router), CUC/Unity/Express, CUP, IP Phones and protocols like (H...

Is there anyway to set the SIP Display Name on an MCU (8510), either on the MCU, via CPL on the VCS, or some other method?  Currently is identifies itself as "Codian MSE 8510".  It use to display the SIP username that was set in the SIP settings if I...

Dear All; I have H323 Voice Gateway with a number of FXO ports, this gateway is defined in CUCM 8.5,every thing is working fine, I can use the fxo port to send offline calls and recieve incomming call on fxo port, but when i recieve the call on the I...

I was just running a preventative maintenance execrise on my Cisco C40 unit and it randomly rebooted itself.  This happened once before, some time ago -- same unit I think.  Luckily we were not in a call and no meetings were interrupted, but I'm curi...

Hi!  We have content server with version Cisco TelePresence Content Server v5.3 Build 3316 and Cisco MCU 5320 version 4.4When i call from mcu to content server usually everything works fine but few times content server stop record audio. It happens a...

Hi Experts,I have heard that Cisco is soon releasing TMSXE 4.0.Could you tell me whats new in it ?What are the advantanges and new features added to it? and How easy will be the installation?Regards,Saurabh

  Hi All,Does TMSXE will support exchange 2013? if yes.. Anybody can tell me the time line.. As our company is upgrading to exchange 2013rdgs,Shree Parashar

Hi, We have around 50 remote sites with 99% of them connected via MPLS with properly implemented QOS. All point to point and multipoint calls works fine with exception of 2 sites, that connected via GRE or IPSEC tunnels without QOS. The interesting m...

Hi,Has anyone managed to get corporate phonebook to work with C-Codecs and MX300.VCS-S x8.1C-Codecs version 6.x and 7.xMX300g2 version 7.0.2Endpoints are configured as 'other device' under FindMe.Please provide nessesary configuration. Jabber, ex90 a...