I want to export TMS users to a txt file so that I can give that file to another business unit, but I am not able to find much info on that.Any help is much appreciated.
Hi all,We have TMS - v14.2TMSPE - v1Jabber - 4.6VCS-C/E - x7.1We have a cluster of VCS-Es, but only one VCS-C per traversal zone. I had thought after reading the Jabber Admin Guide that the "Multiple Server Connections" option...
HiI am a little confused as to why a specific call I have observed worked for a couple of clients and am wondering if there have been any developments in the H.323 protocol which allows some form of NAT traversal natively built into the codec's witho...
Dear All,I have a VCS Starter Pack with Dual Interface and NAT configuration. This is a demo setup and therefore all settings have been made with IP addresses.There is No SRV records. The customer has a Checkpoint firewall and we made NAT configüra...
Hello.We have video collaboration network based on Cisco TelePresense: VCS Control, Content Server, etc.We also have VoIP network based on Siemens HiPath 4000 and Siemens IP phones. Between these networks we create SIP-trunk (between HiPath and VCS C...
I am running a mulitenant environment with external calling through the VCSE. I currently have 10 traversal licenses on this expressway however this is shared with 2 clients .Is there anyway that I can allocate 5 of the traversal licenses to each of ...
Hi I am currently planning to improve a customers video network. The customer has offices spread all over the world, and they have VCS-c installed on every continent. Today they only have one VCS-e, and I would like to install Expressways on every co...
Info on MCU:Cisco TelePresence MCU MSE 8510Serial number SM021XXXSoftware version 4.4(3.49)Build 6.18(3.49)Uptime 6 days, 22 hours, 15 minutesThis is a HD blade that is configured for 40 media portsI need to be able to look at the por...
Hello!Got a weird one from a customer that I'm still trying to replicate with our equipment. Here are the pieces involved;C40 running TC6.2 with a PHD camera in Source1 and a Sony composite output camera connected to the Source3 Composite input (the ...
HiI got several Polycom HDX endpoints which are correctly registered to TMS. On the systems located at the same LAN (but diffrent IP Subnets) I mapped a manual phonebook. Everything is fine so far. It is not possible to map this manual phonebook to s...
Hello,I upgraded my SX20 with ISDN Link (IL1.1.0) from TC6.1.2 to TC6.2.After the update I get the following message in the SX20 system information page:H320Status:ErrorWarnings:Not SIP-registered to H320 peripheralWith TC6.1.2 everything is working ...
All,Has anyone else run into issues with lighttpd after upgrading to TC6? I had a customer yesterday upgrade to TC6 and after the upgrade they could no longer access the codec via HTTP or HTTPS. After further investigation I found that the lighttpd...
Hi I am using cisco jabber video for telepresnece version 4.6 client with lenovo T420. P2P video call with the enbeded camera works fine. however during a conference call the Jabber client does not send the video stream and the camera is no...
Hello!Got a report of a C40 running TC6.1.1 that gradually loses the ability to control it using the IR remote. A reboot of the codec restores functonality temporarily. I have the end user prepared to capture event feedback when the issue starts to...
