TelePresence and Video Infrastructure

Hi,Our VCS (X7.2) doesn't have Enhanced OCS and FindMe license. So, in order to integrate with Lync, I must:Use no encryption since TLS needs Enhanced OCS. Media encryption in Lync is set to support encryption. Use static route in Lync to VCS domain....

I want to export TMS users to a txt file so that I can give that file to another business unit, but I am not able to find much info on that.Any help is much appreciated.

Hi all,We have TMS -           v14.2TMSPE -      v1Jabber -       4.6VCS-C/E -    x7.1We have a cluster of VCS-Es, but only one VCS-C per traversal zone. I had thought after reading the Jabber Admin Guide that the "Multiple Server Connections" option...

Dear All,I have a VCS Starter Pack with Dual Interface and  NAT configuration. This is a demo  setup and therefore all settings have been made with IP addresses.There is No SRV records. The customer has a Checkpoint firewall and we made NAT configüra...

Hello.We have video collaboration network based on Cisco TelePresense: VCS Control, Content Server, etc.We also have VoIP network based on Siemens HiPath 4000 and Siemens IP phones. Between these networks we create SIP-trunk (between HiPath and VCS C...

I am running a mulitenant environment with external calling through the VCSE. I currently have 10 traversal licenses on this expressway however this is shared with 2 clients .Is there anyway that I can allocate 5 of the traversal licenses to each of ...

Hi I am currently planning to improve a customers video network. The customer has offices spread all over the world, and they have VCS-c installed on every continent. Today they only have one VCS-e, and I would like to install Expressways on every co...

Hello!Got a weird one from a customer that I'm still trying to replicate with our equipment. Here are the pieces involved;C40 running TC6.2 with a PHD camera in Source1 and a Sony composite output camera connected to the Source3 Composite input (the ...

DOes anyone know where I can find a tandberg ttc7 manual online? I have searched quite extensively.THanks!!!

HiI got several Polycom HDX endpoints which are correctly registered to TMS. On the systems located at the same LAN (but diffrent IP Subnets) I mapped a manual phonebook. Everything is fine so far. It is not possible to map this manual phonebook to s...

Hello,I upgraded my SX20 with ISDN Link (IL1.1.0) from TC6.1.2 to TC6.2.After the update I get the following message in the SX20 system information page:H320Status:ErrorWarnings:Not SIP-registered to H320 peripheralWith TC6.1.2 everything is working ...