Hi All,
We are planning an upgrade for an existing CUCM, CUC, and UCCX to version 11.5. CUCM and CUC are currently in version 8.6 while UCCX is currently in version 9.0. CUCM(2 nodes) and CUC 8.6(1 node) are currently installed on MCS Server while U...
Hi,
I have quick question about Cisco Expressway. Is IM and Presence server required for Cisco Expressway? I just want to have call from outside with vpn access with jabber.
I am trying to enable web access on 7821 IP phones, using update phone query under BAT. On applying the change and running the schedule, the parameter remains the same on the phones (Disabled), however this parameter can be changed directly from the ...
Hi
So I know how to get a mailbox for a hunt pilot, I would either use a routing rule to direct to a mailbox based on the HP number or use an alternative extension.
However we use a prefix mask in CUCM for our VM Pilots as our numbering overlaps.
Exa...
Good morning, please, if you can help me in this problem:I have a Cisco Unified 11.0 installed platform.For three days ago, the RTM tool is showing me the following message:"UsedDiskSpace: 90 Message String: Common Disk Utilization LWM! AppID: Cisco ...
Hi Helpdesk,I have deployed Prime Collaboration Assurance 11.6 (Advanced), and added ESXi & CIMC using SNMP community strings.Both ESXi and CIMC are in "MANAGED" state in Inventory Management.However, I do not see any alarms from CIMC and ESXi for an...
I have quite a few UC v10.5 and v11.5 machines, including CUCM, CER, UCCX, Unity, IMP, etc. and more than a dozen clusters. We'd like to set the admins up with their own usernames, so when they leave we can shut them off and they won't have access ...
All,
The customer was getting a SIP Circuit for the PSTN but will not be ready. We'll use the 2 existing PRI temporary until the SIP network is live. The customer has an Avaya system that will be replaced by CUCM 11.5 and a ISR 4331 as a MGCP gateway...
I am trying to use Self Provisioning for +E.164 format Primary extensions, when I do that I get an error from the IVR, if I remove the + from the DN the phone provisions fine.
Has any one successfully tried it?
I am running CUCM 11.5
Thanks
Guys,
Title sums it up. I want to see what people's experience has been using PCD for upgrades on servers/cluster that are geographically distant. In my case, I'm looking to upgrade a 8.6.2 cluster to 10.5 but there is about 9500 miles of earth betw...
Hi pals,
I would like to check a scenario that I have purchased SWSS through a Cisco partner for Unity Connection.
As there will be a new service provider to support the Unity Connection and going to upgrade the software version, may I know what wil...
Hi All,
i've configured SAML SSO on Cisco CallManager 11.5 by means of IdP ADFS, and from a laptop joined to domain i'm able to sign into jabber client via ADFS login pop-up, and it is working fine.
Now my question is if it's possible to exclude Call...
Hi,
We have successfully installed PCD on our VM and managed to discover cluster but when trying to add ESXi it gives an error stating unable to mount NFS datastore. We have tried all possible ways to get this fixed but in vain. Finally VM engineer ...
Hello,
I have the following situation - CUCM 11.5 and Unity 11.5:
User A and user B are internal users.
User A has forward all towards User B and user B has forward all towards the voicemail. When I call from PSTN -> User A the call gets dropped. ...
