Running UCS 3.2.2f with B480M5s with same firmware. I have a Power Control policy to impose "No-Cap" Power Control. Each server where it is applied, i get the F0637 fault. If I remove the policy, the fault clears. I had seen a bug in 3.1 but res...
I'm building a brand new UCS system which is running 2.2(3g). The plan is to use FCoE uplinks and it's going to be in a multi-hop FCoE configuration. To my surprise , there is no place to assign the FCoE port channel to a specific vSan , instead I do...
I have look through the Cisco site and I can not find the BTU for the USC 220 server. Can some one provide me that information. I am proposing a BE6K-STBDL-PLS-K9 Server. Thanks! BTW doe anyone know of a Cisco or non-Cisco site that would have...
I'm reviewing the tools we use to manage UCS, as I am configuring another domain (our fourth). Right now we have one UCS Central appliance, and have been running it for something like five or six years (it's been updated to 2.01i). Is there any ben...
We are updating C220 M5 server to Centos 7.5 from RHEL. There are couple of issues.- First we are not seeing the existing RHEL and there is no option available in CIMC to boot from HDD. - Now we mounted the Centos ISO file and used driver disk with l...
we are inserting M5 blade into chassis it gets stuck at the Discovery stage. The new blade comes with new 4.0(4a) firmware, only way to fix this is manually downgrading the FW to 3.2(3x). Is there any way we can downgrade the firmware automatically o...
Good day,
We have a few C460 M4s that have an ungodly amount of RAM in them (512 GB). Booting these servers can take up to 10 minutes while it configures and tests the memory. Is there a way we could speed that up or are we stuck waiting?
Thank...
Dears attached is the report for the Hyperflex sizer in which the requirement for usable storage is 20 TB and i am getting those but i m surprise from the available core is only 90 hence the i have selected 18 Core * 2 socket processor = 36 Core an...
Hello,i have a question about ucs and proxy server. One of our security admins ask me why our ucs fi are trying to reach the internet. He saw a lot of blocked connections in our log files. I did not configure any proxy settings so it should be someth...
Hi folksWe have a bunch of C240 M5 servers with the inbuilt Cisco 12G Modular Raid Controller with 4GB cache (max 26 drives) (MRAID, is there a download link to install and manage the raid sets within the operating system. Is it the LSI Mega Raid co...
We have Fabric A and fabric b each FI has 2 x 8 Gbps - these are NOT connected via Port-channel We have concerns that these links may becoming saturated. How can i verify this from UCS manger? is it do-able or do i need to look at the SAN switchin...
Will upgrading bundle A and B to 4.0(4d) while our current bundle B is on 3.1(2b) instead of the listed "Minimum Software Version" of 3.1(3a) on the Release Notes for Cisco UCS Manager, Release 4.0 cause an issue during the interim of the upgrade? Or...
In UCS version 3.2(1d) we have a bug as below, do we have any more info of how to clear the alert, if any.
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvh18287/?referring_site=ss&dtid=osscdc000283
