Good morning, all!
I have two C210 M2 hosts in a VMware cluster and I'm adding a new host. This requires that I enable EVC to be sure HA works as desired.
In VMware KB1003212, there's a note concerning the Westmere CPU and a BIOS setting:
For Intel...
Hello
I am actually upgrading an hyperflex to 1.8 to 2.6. The first node is ok, but the second node does not discover the hard disks. How can do force the discover ?
admin@SpringpathControllerY8UDKHB8DN:~$ stcli cluster storage-summaryaddress: A....
Is there anyway to change the Server numbers assigned by UCS manager? We rack our servers in a top down approach, ESXi1, ESXi2, ... ESXi8. I'd like the hardware view in UCSM to reflect this. Instead everything is all jumbled. See the attached screens...
I need to swap the names of two fabric interconnects in a UCS domain. FI-A needs to be FI-B and vice versa. The FI's were set up backwards. Is this possible? Thanks.
Hello All,
I have 2 6332 -16UP Fabric Interconnects with 3 chassis connected. I am trying to connect a new C240 M4 to my fabric interconnect via a 40gb port. The port has a fault because the chassis/FEX Discovery Global Policy is set to 4 Link. The...
I made a mistake while attempting to upgrade the CIMC firmware via the Webgui. I accidentally selected the huu ISO instead. The CIMC is now not functioning. The server still boots, but the fans now run at full blast all the time. I have burned th...
Dear Sir/Madam,
Recently,we replace motherboard of one blade in ucs chassis,and re-insert blade in same slot 1 of chassis,but blade can't get up.it indicated Needs Resolution red sign, only Re-acknowleged slot option we can choose, the other ...
I've gotten over the driver hump of the install, and can install a working operating system, but there's something that's leaving me scratching my head.
First, the basics:
Servers: UCS C240 M4SX
Package: 3.2(3a)C
SAS drives: 24
PCH drives: 2
OS to...
Hello,
We need to know if we can put a B200 M3 in the same chassis as our B200 M4 blades? I have seen that the M3 is limited on the firmware update compared to the M4's. Would that be an issue?
Traditional storage systems are limited in their ability to easily and cost-effectively scale to support large amounts of unstructured data. With about 80 percent of data being unstructured, new approaches using x86 servers are proving to be more cos...
Hi,
Is there any difference in which manufacturer CPU I am using in UCS blade?
For example, is there a difference in CISCO manufactured ucs-cpu-e52660E and Intel manufactured BX80660E52660V4 and can I mix them?
Both CPU's are identical only differe...
Hello.
I have an ISR4331 with a "NIM E-Series NCE" (UCS-EN140N-M2) module.
- Hardware information for the "NIM E-Series NCE" states that, as far as internal network interfaces are considered, it has two gigabit Ethernet interfaces.
- On the ISR4331 w...
