Unified Computing System Discussions

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco Unified Computing System™ (Cisco UCS®) Fibre Channel storage connectivity and best practices for your environment as wel...

Both UCSPE 2.1(3a) and 2.2(1b) are using a Verisign "RA certificate" as basis for their self signed certificateHowever this certificate has run out on May 13th 2014In a "real" UCSM You can create a Key Ring with certificate from Your corporate or 3. ...

Hi,We recently have bought a UCS C220 M3 Server, in order to install a virtual environment through ESXi. When trying to install EXSi 4.1; the hard disks are not recognized and listed.When connecting to the Web GUI (CIMC), in the inventory, the disks ...

I have a Two VIC Card on Blade B200 the driver version is 2.3 need HyperV-2012 Vfabricit gives me unsupported driver.

Hi UCS Community, hope I'm posting in the right place...I'm playing with Cisco UCS PowerTool cmdlets but having a hard time finding which one will get / list the VLANs configured for a particular vNIC.  These are easy to find in UCS Manager (see scre...

B200M3 blade with Windows 2012R2 installed does not boot OS after firmware upgrade to 2.2(2c). UCSM shows no HW errors. Upgrade install passed smoothly.Try to power cycle, recover CMOS, but nothing changes. It boot in BIOS, no messages in console.

Before we have our network engineers reconfigure their infrastructure to allow network discovery from SCOM, does anyone know whether or not SCOM will include the virtual switches (Hyper-V or VMware), the UCS fabric interconnects, and the hosted virtu...

Is there any information about VM-FEX support for Windows Server 2012 R2 Hyper-V? In the middle of migration to 2012 R2 project and cannot go further without this.

I have had two recent cases of Flex Flash controller hanging up on two different C240 M3 servers. Luckily I have been able to resolve this issue by going into CIMC and resetting Flex Flash controller, but this is issue getting too frequent. We are us...

Hello,Does anyone know if the SCOM 2012 UCS pack can be used to monitor Cisco C-series server at the hardware level?If so, can it do this directly without going through UCSM (FICs)?If not, is there any sort of pack setup for monitoring of C-series se...