Q1 : one processor can not boot ? (Two processors is ok) Q2 : one processor can not detect LSI MegaRAID SAS9266-card? (Two processors is ok) Please help thanks .
Q1 : one processor can not boot ? (Two processors is ok) Q2 : one processor can not detect LSI MegaRAID SAS9266-card? (Two processors is ok) Please help thanks .
We currently have CUPS 8.5.2 and want to enable the compliance feature for IM. The documentation found on Cisco's website does not explain the proper sizing of a volume/disk for the PostgreSQL database as well as maintenance procedures. If anyone k...
Hi,Importing of equipment from live UCS to Emulator fails to load and gives the following error"Server Error: code -1: 302 Found" as both http and https are enabled on the live CUCM.Thanks,Javed Koor
We are trying to determine if it is possible to install our Servers running a NICE VoIP recording Application in our Virtual environment on Cisco UCS. We have filtering TAPS installed in our network that provide as an output a copy of the RTP media s...
Is it a requirement for this to work to pull out the local disksif they are present? I am using the "Any configuration". with a local disk present.
I configured it correcly I believe. The strange thing is that there is only one iSCSi initiator pool. See attachment.so when we configure iSCSi Boot Parameters, there is just ONE IP Address Policy. I think this may be the reason th...
Setup are 2 UCS blades in 2 datacenters 50 miles apart. However the backbone between the 2 is 40 Gigabits. The UCS's are connected with fiber at 10 gigs to a Cisco 3750 switch which is also 10 gigs. The San in one Datacenter is an EMC Isilon and the ...
Hi,Is it possible to configure a vlan for packet&control on etherchannel?does ESXi keep configurations locally which received from VSM? (also does it exist after reboot of ESXi?)
I have a UCS Blade Chasis with 8 Blades.Running iPerf to test transfer speeds between 2 Linux machines and I have speeds upwards of 500 MB/sWhen running iPerf from Windows to Windows ....... or...... Windows to Linux...... my speeds are 20 MB/sWe hav...
I messed up the clock sync, because I specified ntp-clock. At the moment the clock is 10 min faster on FI-B (Show clock). I assume this is why I no longer can log into UCSM?I have rebooted both the FIs, but the clock is still different on the FI-B.Do...
Hi all,i'm working on UCS Manager Suite and i would like configure Authentication method using LDAP protocol ( AD : Windows 2008 R2 Standard Edition).I follow this configuration guide:http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/sample_co...
Hi there guys!I'm triying to change a blade of chassis, but everytime that we make the change the OS into the blade its deleted; this is hapenning with all the blades that are trying to move. We don't have any Scrub policy applied.Anyone has idea of ...
Can someone confirm if this card comes with 8 or 16 ports licensed?Also, can the ports be configured as server ports?
Hello,I was wondering if it is possible to use an updating template to upgrade firmware? If so does anyone have any examples/documents? I would like to have the firmware automatically update the next time it boots.Thanks
where can I find this?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-06-2024 10:53 PM | ||
10-03-2024 07:41 PM | ||
10-03-2024 07:39 PM | ||
08-15-2024 11:16 AM | ||
08-15-2024 08:03 AM |