Unified Computing System Discussions

I need to install ESXi 6.7 U3 in UCS 220 M6S with local storage. Any tips or gotchas? Any help full articles? I also need to configure it at Ciso Intersight level. Where can I download custom iso image? Can we install in local hard drive also or only...

Our existing UCS domain (Fabric1) is now full and we have commissioned a new UCS domain (Fabric2- new FIs & chassis) and have plans to add VMware hosts from Fabric2 to a shared vCenter cluster which currently has all hosts from Fabric1.This should be...

Hi All, Can we configure the latest Cisco M6 models by the UCS manager? Thanks 

I'm not able to authenticate with our UCS server using credentials established for me, which work fine in Chrome.  If I run the  imm-compatibility-checker.ps1 script (from GitHub), the message is:          Error connecting to UCS Domain using supplie...

Hi, I have a Cisco UCS B200 M5 Server connected to 6 sdd units within an ESS. I am trying to install ESXi but not getting any storage devices showing.  I have shown some of my settings below, many thanks  

Is anyone able to advise from real life experience how loud 6332-16UP fabric interconnects are during idle/low usage? I'm weighing up moving to these for my home lab, but am concerned about trying to know how loud they are first. I had 2 x 6248UP fir...

The Chassis/Fex discovery policy now has a backplane speed selection option, 40G or 4x10G.  I assume this coresponds to the breakout port function, but I have not found any good guidance on this as of yet.  What is the function of this selection?  Wh...

I know Ucs fi backup full-state create a snapshot of system and system configis this snapshot same as VMware snapshot including system state and data? when i restore at setup can I restore whole system software as backup ,snapshot,system config from ...

Hi all,On our 6248UP based UCS systems i have ipv4 multicast snooping set up and that has been working for a long time now.Now i need to do the same for ipv6 multicast, but i cant find any info about this.is ipv6 multicast even supported ? All info i...

HI, I currently can't load up CIMC. When I enter the CIMC IP address via Cisco UCS Manager, it gives me the KVM console for the server and no option to enter the actual CIMC?  Many thanks for any advice.

We've got HPE Nimble storage that we need to attach to our existing Cisco UCS + VMware environment, which currently runs off different storage. I initially thought we'd get some guidance along with the Nimble, but HPE's advice was mostly "go talk to ...