I have 6 SPA942 VIoP communication devices all seem to work well but one; the voicemail indicator light stays continuously lit even when there are no voicemail. I found a support site telling me to access the web-based setup page from the network op...
Hello.I have a CISCO2811 series router & I have enabled H323 Gateway. This 2811 router recieves H323 traffic from its FE0/0 & forward the traffic to"session target ipv4:10.20.20.20:1720" via its FE0/1. But all the calls are getting disconnect after f...
Hello,My Cisco AS5400 is connected to a sip provider to make and receive calls. The AS5400 is connected to a huawei core backbone.Huawei Core -- Cisco AS5400 --(Internet)-- SIP ProviderEverything is working fine (inbound and outbound calls) except wh...
Dear All ExpertsI have three cisco 2811 routers, Router A has both 4 FXS & 4FXO port , Router B & Router C have 4 FXS port. connect with Alcatel PABX.Now, the problem is ph lines are down after 3 days or more. Whenever down, i try to refresh voice po...
HI,I have the following problem:I don't understand how I have to configure my callmanager 7.1.2 to comunicate and to register with a th3d Sip gateway.The main problem is that th3d Sip gateway to have to register with my callmanager with username and ...
Has anyone been able to use the PGW snooper application to capture M3UA/SCTP traffic? I've tried to select the port number in seedfile.txt but does not appear to work. Any help and seedfile entries would be appreciated.
Hello,I have a wan link connecting 2 offices together.We are using a 2821 router with an additional HWIC-4ESW module in it. The 2 integrated ethernet ports are in use.What we would like to do is put every port of the HWIC module in a separate vlan an...
Hello,My client would like that the chat function be available so that their agents can speak to all agents even if they are on different teams. My understanding is that the chat function is only between supervisors/agents within a team. Would ther...
I am a telecom tech trying to learn about more about the Cisco world. I have been trying to get CME registered to a SIP provider (Broadvoice) for a few weeks now with no luck. Can anyone look at this and let me know if there are any blatent problems...
Que tal, me gustaria ver si me pueden ayudar.Estoy tratando de conectar una troncal sip de skype al uc500, pero no me deja, me manda este error./-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Sent: INVITE sip:36169415@sip.skype.com:5060 SIP/2.0Via: SIP/2.0/...
hello.......please help me that.....how to activate login key at cisco ip phone....message is here on cisco ip phone display<that key is not activate here>so,how to activate that key......cisco
Hi,I have a PGW2200 running call control mode. I wonder if it can send the concurrent calls report to SNMP server?Can someone help me how to configure on PGW2200 to support this feature.Thanks,Du, Nguyen Van
