Hello all,Could someone please advise me on how to set up the logs so I can analyse an issue with the device regularly losing its registration? System InformationSystem InformationName ValueModel:SPA112, 2 FXSHardware Version:1.1.0Boot Version:1.3.1 ...
Forum Posts
Resolved! Spa504G Alert-info problem
Hello, I recently updated some spa504g phones form 7.1.3 to 7.6.2 firmware and I now the phones doesn't accept the Alert-info value in the SIP Invite.When the phones was on 7.1.3 I can set distinctive ring on it using the Alert-Ïnfo value on the SIP ...
Hi, I’m a novice to phone systems and have installed freePBX and Cisco SPA504G phones with Sipgate basic package. We have 4 phones, and one number, as we are only using Sipgate basic there is no trunking option from freePBX so each phone is set to ta...
Hi, I can’t seem to find any information on whether or not it’s possible to connect a line with multiple phones connected in series or parallell to one port on the SPA112/122. This would be useful to connect a home phone network with 2-3 phones t...
Resolved! SPA525G2 Compatible Bluetooth Headset
Would appreciate any views on bluetooth compatible (preferably over the ear) headsets for the SPA525G2 IP phones which allow you to initiate and answer calls using a button on the headset rather than having to answer (in particular) by pressing the h...
Hi, I am new to the forum. I am trying to find out why some of the ATAs in our system are occasionally locking up and whether there is a relationship between not getting this syslog message "LOCAL3.DEBUG: cordless_stop_rtp(), RTP session 0 stopped su...
Hi all,I have 3 x Cisco SPA 112 ATAs all registered back to a Unify Openscape Business PBX.The SPA 112s are not on the local site to the PBX they are on a remote site which has a VPN connection to the main site where the PBX is located.Now the issue ...
Hi everyone,I would like to know how the ATA 192 is supposed to be configured to achieve the goal as follows: - use it as the first device attached to ISP endpoint (ahead of my main LAN Asus one): is the bridge mode the correct one? As far I am conce...
Resolved! ATA 191 Adapter Configuration Utilily
I am able to log in to the GUI via the IP address and default ID/PW. I am not able to see the quick configuration and network configuration to set up my phone for it's purpose. It's like it's only displaying the read only options of Voice, Administra...
Hello, I have a problem with my SPA122 configuration with the Italian provider Tiscali.The out coming calls work fine, but for the in coming calls, the phone ring, the audio is ok, but the caller id is not displayed when the phone ring.The provider s...
When I use a bluetooth headset with my SPA525G, there are two huge problems. First, the audio is scratchy, dropouts, etc. Second, when the call starts, the person at the other end says I sound like I'm under water. After 10 seconds or so, it starts ...
Hello, I have a 7945 phone whose time is 1 hour late, other phones on the CUCM have the correct time but this particular 7945 displays wrong time. I have deleted the phone and added it again, reset the phone but issue still persists. Kindly assist.
Customer's UC500 system is set for US Central time, using NTP to update. Times are correct everywhere except on one 7945 phone, which displays Pacific time. How can I fix this?
Resolved! Intermittent Phone Connection
We use two Cisco SPA525G phones for our business. After several months with no issues, one phone suddenly began having connection issues a few days ago. The lights all turn orange for a few minutes periodically throughout the day. The wired connectio...
I have a UC560 that was working fine, but after a power outage the CUE module just says “Voicemail System is Unavailable. Try again later.” When I session into the module and do a show run, I see the error below after the config finishes scrolling: ...
