Voice Systems and Accessories - Small Business

Hi.  I didn't find in documentation how to solve the following problem.  It is necessary to execute cisco device reset with the current active calls. Sometimes suspends the voice module, but web the interface it is thus available, the device doesn't ...

Looking for some advice on the following....We have a UC560 & SMB network.I need to extend PoTs service to a remote building, to which we have no infrastructure cabling.Wondering if I can do that from the UC560, if I create a Wireless bridge to the r...

Hi ,I tried to configure sip trunks with AAPT (Australia), bit it didn't register with sip & gave following logs. Please advice me to resolve this issue.RegardsSamJan  1 11:00:30 UC320W user.debug voice: SIP message from source IP 127.0.0.1 is blocke...

It used to be in the System tab, and used the time zone and DST settings in the Regional Tab.I bought this device recently and I cant find in the GUI the NTP settingsHere the informations:and I have no tab under "Network":and I am 9 hours away from P...

Hi,we are using UC560 for IP Telephony system and i received complain from end users about that any user know the IP address of IP phone he can access it through the web and view all call history  as dialed calls or received calls.so i need to disabl...

I have SPA504g connected to my voip PBX. When the MWI option is set to yes, it turns the MWI on permanently, regardless of whether there is a message or not.The only way to turn off the MWI is set the option to NO.Any ideas why this ahhpens and how t...

I down loaded SPA525_Remote_SSL_VPN_with_CCA_TEL_19_sdistef1 pdf and followed instructions to set up our SPA525G2 to connect remotely. However, as I ran through the instructions, the phone didn't reboot as I expected and it didn't atomatically pull i...

Hi, I have UC 540. Every user has its own DID and if user is not there call will be forwarded to voicemail (39), after which user will receive email with the message. On the other hand there is ISDN line, and blast group. So all phones ring, and if n...

    I get "Failed to Obtain WebVPN Cookie" error on a SPA525g, but I can connect and VPN via web browers or anyconnect client.  Any ideas?

     HiI have a cisco spa303 and it is showing S.O.S phone in recovery mode. It is a brand new phone. Please advise.Also, I need new ring tones on the phones, how can I do it. When I open the web interface for the phone it does not allow me to go in ...

I have a UC 540 at the office, at my house I have an SR520 connected via VPN Remote.Telephonees behind the SR works fine, and I can ping the UC540 from my house.the problem is from the office to my house, I'm unable to ping. Any ideas which device is...

Hello!We have BE 6000 and CCX Promo Bundle License.Now we need to implement IVR and have one question. Do create IVR do we need additional licenses or seats lics.Or we can create voice responses only with this CCX Promo Bundle?