Voice Systems and Accessories - Small Business

The fax to email stopped working for both of my users that are utilizing this service. One of the fax lines is through the FXO due to it being a forwarded DID. The other is piggybacked on the users main extension. It had been working fine previously ...

Hi all,Our client is currently on an aging CUCM 6.1 system with 38 users and no current UCSS.  We're quoting a BE6K solution.  Is it possible to use the 25-user starter bundle and combine with the 3-1 upgrade w/ UCSS sku for the additional 13 users? ...

Does any one know what SPA stands for in regard to SPA509 phone?

Hey all.  I'm working on a UC560 I installed a couple of weeks ago at a client and while out today to do some user training and final configuration I've run into some issues with contacting the CUE module via telephone.  I can get to the CUE GUI and ...

I have understood that the UC320 handle up to 9 FXS. I also know that I can connect up to 2 SPA8800.but my question is: I can use a SPA8000 with the UC320? and especially from the CCA to configure it?Thank you.

I appologize in advane if there is a thread for this, there are lot of discussions. So my question is simple (I hope)So I have a UC540 and I want to be able to have users be able to call into their phones and retrieve voice messages remotely. Is this...

Hello!Currently, I have a UC520 with some Cisco Ip Phones 7911 connected on it. I am new using this devices, When I started reviewing them  I found  they have configured Voice Mail but I dont have any password to reset the Voice Mail Greetings and pa...

Hi,I want to thank Cisco for their incredible products, I just setup a little telephony network with asterisk, cisco switch and telephones and all works greatly.I have just a question, I want to know if it is possible to autoanswer calls that comes f...

I've been trying to figure out how to offset the light pattern of the LED's on the phone.We have about ten SPA509G phones running, but when someone is on the light, or when everyone is on the phone, they light up red on all of the lines.  If a call c...

It would be nice if the ATA could adjust its QoS automatically either by mean of clicking on a button from the Interface of by response to a SIP NOTIFY.The response of a SIP NOTIFY would just return the new computed QoS so then you can just update th...