Voice Systems and Accessories - Small Business

Hi All,Need some help. I have a central site that will be running Cisco BE 5000. I have a small branch office I would like to place IP phones in so we can just dial an extension to call each other. The branch will have its own connection to the PSTN ...

Almost all of Cisco's SBCS market is the small and medium business space.  Most, if not all of these SMB's have a Microsoft Small Business Server 2003 or 2008. It will be critical, In order for Cisco to be considered as a purchase option, that the UC...

Hi,I wonder if anyone can help?I am trying to set up a US320 (for the first time).The numbers to be used are London (UK) numbers in the following format 0208 xxx xxxxSo I have the Region to "United Kingdom",the and the Dial Plan to "Local calls are 7...

I have a UC540 that is connected to a single SG300-28P via the expansion port. I have 5 VLANs and 5 subnets (one for each VLAN). Each has a configured DHCP Pool and VLAN on the UC540. I can ping all of the VLAN interfaces from the switch ports on the...

Cisco Forum:I'm supporting a customer trying to implement the Smart CallConnector Toolbar application in a Window's 7 64-Bit environment with 32-Bit Outlook.  The latest I could find on the forum is that this is not a supported environment (Window's ...

No problem to login as default admin/admin via WWW interface. Unfortunately, default password is not so secure. So I added following lines to provisioning:  <router-configuration>    ....    <Web_Login_Admin_Name ua="na">admin</Web_Login_Admin_Name> ...

I currently have a Plantronics mechanical lifter cordless headset that I use with my Avaya IP phone.I now have a Cisco IP phone.Does anyone have a recommendation for a cordless headset that is compatible with a Cisco SPA525g phone?As I understand it,...

Hi,I am using a SPA8800 as gateway with an Asterisk server. Works pretty well, except that the PSTN line is forwarding the phone number. and I cannot see the Number display on my phone, but only the name of the peer, I gave !?!?- Is there any way, to...

Hello Partners,Country Packs for Brazil, Russia, UK, China, and Australia are now available on upload.cisco.com. These conutry packs are for Cisco Business Edition 3000, version 8.6.4. URL: https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYP...

Unusual request here, but I hope someone can help. We have taken over an office from a former firm and purchased the equipment that came with it. There are three VOIP phones that belonged to the firm here and we have no idea who set up the accounts o...

I have a problem with the phone 502 and the module expansion SPA500S, these are registered to a SIP server in the  UDP port 5080 , everything works fine, unless pickup from the module expansion. when i check  the SIP packets, to perform the pickup se...

Does anyone know or has done an integration of UC500 with Verint Audiolog for call recording?       thanks,Min           

Hi.We are trying to figure out how to transfer a an established call on the SPA504G while a second call is incoming.   At present, the receptionist has to answer every single incoming call before the XFER softkey is seen again.   This is completely u...

In my setup, I am not using the WAN port. My UC320 is connected to a port on a ASA for internet access. DHCP and NTP is provided by a Windows 2003 Server. DHCP on the LAN side works fine. Internet access for data lan is fine. I have loaded the PMF fi...