Voice Systems and Accessories - Small Business

Hi,I wanted to ask if the expansion module for a SPA500 set can also have analog trunks programmed per key.Thanks

021609: Apr 16 17:25:34.071: %SEC-6-IPACCESSLOGP: list 104 denied udp 169.254.1.245(35101) -> 169.254.1.255(5000), 20 packets021610: Apr 16 17:25:34.071: %SEC-6-IPACCESSLOGP: list 104 denied udp 169.254.1.220(21302) -> 255.255.255.255(21302), 29 pack...

Hi AllI have a UC560, CME version 8.1 with 20 phones, some phones are SPA504 (7.4.8a) and others are SPA525G2 (7.4.9a)Here it is the paging-dn config:ephone-dn  1 number 101 no-reg primary description IP-Paging1 name Office Page paging ip 239.1.1.1 p...

HelloI'm haveing a problem with my SPA9000. If I dail a number from Switzerland, its works fine. But if I dail a number of Germany 0049921XXXXXXX, I see on my SPA504G the error Internal Server Error (Interner Serverfehler).My dailplan looks following...

I think that there is no availability for cBarge support in SPA50X  Phones configured for UC5x0 systems (SPCP Protocol). I found some posts indicating this point.My question is if it can be configured for SPA525 Phone, because in page 10 of the below...

We're looking to configure a UC560 with a SIP trunk over a Site-Site VPN to a Mitel 5500 (to run latest version 5). This is purely for site to site calls via internal DDI's.Having a quick hunt round I see a few brief items regarding Cisco CME to Mite...

I think that there is no availability for cBarge support in SPA50X Phones configured for UC5x0 systems. I found some posts indicating this.My question is if it can be configured for SPA525 Phone, because in page 10 of the below document:http://www.ci...

Hello,we have a customer with a UC560 installation and they are considering a new web-based CRM-application. The developers of this CRM-application asked us if there's any click-to-dial option with the UC560. They want to use callto: links in the app...

Hi,What Attendant Console applications are available that work with SPA502 handsets, SPA9000 & SPA400?  does CISCO have one?  Are there any free ones?ThanksJK

I need to reload the CUE module in our UC520.  We can't access it right now, just get the waiting.... message for a long time.Is service-m i0/0 reset  the right command to reload it without losing any data?  I cannot reload the whole router.Thanks

I am trying to reset my UC560 to factory defaults becuase it looks like my VLAN.DAT got corrupted.  I tried deleting the vlan.dat and adding the vlans back manually but that isn't working.  sho vlans reveals "No Virtual Lans configured", however show...

Last week, my SPA112 was suddenly unable to receive incoming calls. The LAN traffic light was flashing continuously and SIP stats were showing over 1 GB data received per day.My VOIP provider, CallCentric, ran through several troubleshooting steps ov...

For several months I've been looking for how to configure the Uc540 to accept iphones and how to configure the CISCOMOBILE App 8.1 (or the new Jabber) to connect to the uc540.Before, some people write that its not supported yet, but yesterday I noted...