Voice Systems and Accessories - Small Business

I have had one of our SPA400's die. Bought a new unit and I am having issues with getting it to hold a static IP assignment. I have updated to the latest firmware 1.1.2.2 and the unit wont hold a static IP assignment, It always defaults back to 192.1...

My problem seems to be with a Linksys PAP2T. The issue has been happening since I received the PAP2T a year ago.Normally, I see 2 lines of the same caller ID number on inbound calls.  However when I receive some cell calls and some IP calls, sometime...

I have a UC520 setup as a key type system where incoming calls go to an ephone-dn mapped to the CO lines.  The phones all have the CO lines as buttons.  The customer wants the extension button to ring on the phones but not the CO line buttons.  They ...

We have roughly 40 7940/7960's and 2 7921's that all display the correct time.  However, we have 4 7911's that are all 4 hours ahead of the actual time.  If you show clock, this is the output:UC520#show clock11:14:26.052 EDT Wed Aug 12 2009But the 4 ...

We have a UC520, where they want to enable the option to Press 0 during someones VM and get kicked out to the Operator.  I found an article, https://www.myciscocommunity.com/docs/DOC-1445#Can_a_caller_zero_out_of_the_voicemail_How_do_I_set_the_zero_o...

I have a UC520 that is licensed for 48 users for a customer.  They have 48 people at their office but have 20 people who are on the road and just need a mailbox (no hard or soft phone).Is there a limit to the amount of mailboxes that you can create o...

I am wondering if anyone has experienced this offhand and has some quick suggestions before I call STAC.We have a UC540 with email notification set up. Users are being emailed thier voicemail messages just fine.  For soem odd reason, the GDM group ma...

I have setup all my phone users's voicemail mailbox's to be checked in Outlook 2007 via the IMAP option. I am now wondering if a "General Delivery Mailbox" can be checked via IMAP in outlook?

Vertical Service Announcement  CodesIt seems that it works when dialing the star codes, the Service Annc Base Number followed with the Service Annc Extension Codes is dialed instead of the star codes, so asterisk will understand te feature but when u...

Can anyone direct me to a source for replacement batteries for the WIP 310?

Is there a difference in the sytnax required to enter a daylight saving time rule into a SPA400 & a SPA9000?The rule  start=10/1/sunday/02;end=4/1/sunday/02;save=+1   works fine on the SPA9000This starts DST on the first Sunday of October at 2am and ...

I noticed that the behaviour of the NAT_Keep_Alive_Msg sent by the device changed with firmware 5.2.10.Prior to 5.2.10 the keep alive messages did not contain a 'Contact'-Header. Changing the message type from $NOTICE to $REGISTER worked fine with As...

Is there any way to increase the volume of the 504G other than the volume control button on the phone?  My customer is complaining that the max volume setting obtained is not loud enough.