Voice Systems and Accessories - Small Business

Hello Folks,I have recently installed two UC320 systems for customers, each trying to use the built-in FXS port as an office extension. Each system is running firmware 2.1.2, and each system is working fine with the exception of the telephone connect...

This is one of many similiar complaints I am seeing from customers. On a trip to Customer A, I found the combination of the 'Standard' deep bass audio setting and high handset volume to be very uncomfortable in normal conversation. In some cases it w...

Hi All.Is it possible to customize a background image for SPA50XG phones?  By default, there is nothing. In cisco spa500_admin guide says:STEP 1 Copy the image to a TFTP or HTTP server that is accessible from the phone. STEP  2 Log in to the configur...

Hi,Currently, We just want Internal Local Voice Calling fearures Across Campus. & We are planning to take Cisco Business Edition 6000 as Communication Manager.    We do not want to Connect PSTN at this stage.  SO, For IP Phone to IP Phone calling , D...

Does anyone know how to build a simple FTP site to a local computer so that I can see the output for the BACD stats?

I have a customer who called this morning and stated they were unable to transfer calls from the secretary to any other station. Upon visiting this site I found that none of the phones could make internal or external calls, therefore by that though p...

Good day... I am interested in any experiences ppl have had with UC500 installations and FXO Volume issues.  We have installed at least 5 UC540's and 560's that have had issues with Volume.  The customer has complained that the volume is too low.  We...

I know that the 7975 phones work well with Plantronics wireless headsets and will do remote answer with the special adapter cable.  Is the same true for the SPA 500 Series?

Will the Plantronics S11 and Plantronics CS55 work on the SPA504 and SPA508 phones?

HiI've just purchased two SPA 303 IP Phones. We have a SIP VOIP subscription with Soho 66 in the UK.I would like to use set up the phones so that they both ring when a call comes in and either can answer the call. Likewise, when one person puts the c...

Hi,i have UC540 configured to work as VOIP and Internet access gateway now and sw-3750 as core and 2 sw-3750-SFP for fiber uplink connectivity i want to configure all the Vlans on sw-3750 Data,vocie and Wireless and route all traffic to UC540 only.ho...

Hi there,I'm getting a lot of trouble with setting up the UC320WI have the following:* UC320W* Cisco SF300 Switch* Billion 7404VNPX RouterUC320W WAN port (192.168.8.2/24) connected to the Router (192.168.8.1/24)UC320W LAN port (172.16.30.3/18) connec...

On the SPA525G2, there is a parameter for both firmware updates (Upgrade Rule) and for auto-provisioning from a server (Profile Rule). I cannot seem to find documentation, including the spa525g2 admin guide, on how to point the phone to request a def...