VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Here is what I want to do:Have certain staff log into our network from remote locations (home, on the road, hotel, ect) and use documents on the server just as they would be as if they was in an office on our network.Currently I have a 5510 in my mai...

toddyboman by Level 1
  • 1818 Views
  • 12 replies
  • 0 Helpful votes

Dears,I am having a  Site to site vpn between my ASA 5510 and ASA 5520..Tunnel is work s fine... but i see sometime the SA breaks down even through there is interesting traffic from one location to other.  if do reinitiate the traffic  the SA will co...

Shibu1978 by Level 1
  • 583 Views
  • 3 replies
  • 0 Helpful votes

helloi want my asa 5505 8.2(5) to access my proxy server on remote lan through VPNmy VPN is OK, all PCs of local network can access to remote network.but ASA on local network can't access to remote network.i think it's a NAT problem but ....local net...

legal by Level 1
  • 950 Views
  • 1 replies
  • 0 Helpful votes

Hi,I have a Cisco 2821 and ASA 5510 as a VPN Router in my network.Our remote users are using Cisco VPN Client 5.0.07 and I need to monitor them on a server and keep their Connection Info to generate some reports for my manager.Could you please let me...

Has anyone been able to configure and connect using Cisco anyconnect ssl vpn over an Cisco IPSEC  tunnel. I have used this in past from a Windows XP system in past but its not working now. None of my users are able to cooect using the Anyconnect over...

Hi,I'm a bit lost with licensingI have an ASA 5510 and I would like to be able to use mobile devices (iOS/Android) with anyconnect.See below my "sh ver" :================================Cisco Adaptive Security Appliance Software Version 8.2(1)Device ...

nvanhaute by Level 1
  • 804 Views
  • 1 replies
  • 0 Helpful votes

Hi,I have 7206 VXR with VAM2+ card. I am seeing close to 4500 IPSec conenction with the router. The traffic is low and utilization is below 10%. I am just wondering is it an alarming condition since the router is touching the documented tunnel capaci...

bgandhi by Level 1
  • 740 Views
  • 1 replies
  • 0 Helpful votes

Hello,Have a really strange issue.After the first install ( Pre-Deploy ) of Anyconnect, entering domain name in "Connect" field, and pressing "Connect" - it connects without issues.Then I press Disconnect and try to connect again - it complains that ...

tksupport by Level 1
  • 461 Views
  • 1 replies
  • 0 Helpful votes

         Is it possible to have a switch/ router configured for  a 2 x Tacacs servers in  different locations. They are not clustered, they are on the same network, but different domains and in different countries and use different login credentials ...

Hi,In the ASA log, we are seeing the following error:Error Message %ASA-3-722036: Group group User user-name IP IP_address Transmitting large packet length (threshold threshold).I presume our server is sending large packets to the SSL client? H...

networkdvd by Level 1
  • 12050 Views
  • 4 replies
  • 0 Helpful votes

I have configured SSLVPN on a  asa5520 with aaa and certificate authentication. My problem is:both authentication works fine,but I find the client users can use any others' certificate to authentication,I want to binding the aaa account to user's cer...