VPN

hi,I am using PIX 506 with DSL connection. We are able to access the Internet through PIX. But when i am creating the remote access VPN on PIX , the tunnel is getting created . But i am not able to ping into inside LAN on PIX side.When i am checking ...

I am trying to connect two 501 PIX boxex (w/ 6.3). One is at a location with a static IP address, and the other is at a location with a dynamic IP address.I have not been able to get the two to connect via a VPN tunnel. It seems that the PIX is not...

Hi all.We wanto to logout all users at defined time every day.With access hours we limit only logon hours, but if a user login on permitted time range, it remain connected also outside this times.Any idea?ThanksDaniele

A branch office connects to the internet via a cisco 837 with 1 static ip address. NAT is being used for client access to the internet. A static NAT rule is created to translate smtp from external to internal.ip nat inside source static tcp 10.254.0....

Can you route IPSEC/VPN traffic through the same interface (or by using a loopback address)?To be more specific. Suppose you do have a LAN with a couple of servers and an existing Networking infrustructure. You wany to enable a VPN tunnel for a serve...

Hi there, I have a issue with the latest client on Windows XP and it will not connect. Other machines connect ok but when this one tries it gets an error in the log. It is as follows:Unable to establish Phase 1 SA with server "***.***.***.***" beca...

Hello,I'm taking my VPN 3015 from 3.6.x to 4.x. Can someone answer the following questions, please:1. What's the difference between 4.1.x and 4.7? Why the discrepancy?2. The RNs for 4.7 say a minimum of 128MB RAM for 4.7. I can't see how to find...

Is it possible for a 3005 which is behind a PIX to do a L2L VPN to another 3005? The 3005 public interface is not used; the PIX does NAT to provide an address to the 3005 private interface. If so, any examples or suggestions would be appreciated.

Hello,I am trying to get a LAN-to-LAN IPSec VPN to work.Site A is 10.250.0.0/16Site B is 10.0.0.0./8On Site A, the inside network accesses the internet by being PAT-ted to a pool of four global IP addresses - 64.aa.bb.cc/29Site B has NAT-ted the host...

I have many connections open to multiple site but at one there is a sonciwall firewall and it will let a client authenticate onto the vpn set up the tunnel and then drop it within 5 minutesthe vpn log show this197 03/31/2005 10:06:16.030 SEV=4 IP/5 R...

Hi All,I am very new to using/configuring Cisco VPN Client. We customized our VPN client and there are multiple sites listed. I have to create a new cleint where I need to remove one of the sites from the list.I started looking into the documentation...

Hi, Makarand.I have a 1720 and a 3660 (with a multiport AM16 modem card option) both connected to a LAN with EIGRP configured. I would like to have an async /aux backup on the 1720 call the 3660 IF EIGRP adjacency goes down and there is a traffic req...

I have a root CA on a vpn concentrator of 4096 bits. Intermediate CA certs are 2048 and will install fine. The Intermediate certs give the option of 'Accept Identity Certificates signed by this issuer' (on version 4.7 software) so I am assuming (corr...