VPN

We have several different designated groups set up within our Cisco 3000 concentrator. Most groups have no problems or just the occasional drop of their VPN connection. One particular group has, for the last 3-4 weeks had their connections dropped af...

HiSo i'm troubleshooting a vpn problem between a pix and an ios router...this is just one of many i've configured by the book and not one problem untill now. I get the following debug message on the pix;VPN Peer:ISAKMP: Peer Info for xxx.8.167.63/50...

I am using a 1711 Security router to connect a small network to the Internet. Internet side is using a single IP address (NAT overload). The router is also an Easy VPN server for a number of PC clients. I want to allow incomming connections for mail ...

I'm interested in this topic: wonder if this is a hardware feature or just normal routers with proper IOS image to do DMVPN. Does anyone has link or white papers on it ? Thanks in advance.

Hi,i've configured a Cisco 2800 Series with an WIC-1ADSL with the normal parameters for the PPPoE connection. The ATM is up but i can't get the PPPoE session to start.I do debug pppoe events and it appears the following message after the first PADR i...

We have site to site redundant VPN's for our WAN using our Pix firewalls at each site. The question we have is:When our District Office, the center of the WAN star, has a power outage and the remote sites try to establish their VPN what happens with...

I have to configure an a tunnel IPSec to communicate two private networks between a Cisco Pix Firewall 501 and a ISA Server Microsoft.Do something send me documents or configuration about ?ThanksLorenzo

Hi, i am trying to encrypt data through a central site and a branch. The configuration (hopefully) is ok because i can ping the other side successfully. My problem is that when i initiate the remote desktop connection to connect to a terminal server ...

Dear All,what is the difference of them?Regards,mak

I have a 3725 3DES VPN router connection over frame-relay via multiple point-to-point sub-interfaces to various branch sites.Have been receiving complaints of some TCP based services intermittenly dropping out.I cannot see any major problems on any i...

Can some one let me know the advantage of using CA for Cisco VPN clients to connect to the corporate network. I am planning to implement microsoft CA with cisco pix firewall and make the clients connect through the CA.Thanks in Advance

Hi there, My friend has a 1604 router and is trying to access his corp VPN using the Cisco 3000 VPN client v 3.6.3.He was previously using an ISDN card on a gateway PC (instead of the 1604) and the VPN client worked fine. He has not made any changes ...

I have installed VPN client 4.6 and when i try to connect, Log file shows follow error. Cisco Systems VPN Client Version 4.6.00.0045Copyright (C) 1998-2004 Cisco Systems, Inc. All Rights Reserved.Client Type(s): Windows, WinNTRunning on: 5.1.2600 Ser...

I have a 7507 with RSP4 and IOS 12.2(26) Service Provider. This router are terminate 1600 ATM VCs with RBE.On my standard configuration the sub-interface has the following configuration:interface ATM1/0.32 point-to-point ip unnumbered Loopback0 ip he...