Hello everyone,I have an issue adding Capwap ap's to the controller, It all started when I had to reset my ME ap since it was not transmitting WiFi signal, and after the WiFi issue is resolved and reconfigured the ME ap, I'm not able of adding the Ca...
Forum Posts
Resolved! Mobility Express vs EWC
Mobility Express and AireOs are legacy and it seems that they will disappear with the EoL of Cisco 802.11ac APThe option for small networks is to migrate to EWC.Mobility Express and AireOs were great for those small networks and were very easy to man...
Hi all,for wifi tests we have to supply Access-Points to a testlab. Therefor we thought about using an AP2802E-E-K9 with Mobility Express. Also we will have to use different Country-Code like "US" or "CA"With -E the 2.4GHz maximum Power is 17dBm (Qua...
Dear All,I have a Cisco 1815i AP with mobility express installed. I've been noticing lately that its transmit power is low (3 dBm) where other APs have 18 and 20 dBm. In addition, coverage area is small.Although this was working normally before, but ...
We have installed 4 x 1542i Cisco AP's, set to use Mobility Express (v 8-10-130-0 ) in mode Bridge. They are two separate links operating independently to different buildings in the area.My issue is if both links are switched on the first link is dro...
I would like to keep the logs of the Wi-Fi connections of users and devices for compliance. I use Cisco Mobility Express. How can I do it?Thanks
Resolved! 802.11b Global clients threshold
Hi In mobility express GUI in RF profiles "Maximum clients per radio" limit is set to 200but in cli it is showing below.(Cisco Controller) >show advanced 802.11b profile globalDefault 802.11b AP performance profiles802.11b Global Interference thresho...
Hi.does clients like a laptop with windows/mac or a portable device with android/iphone etc also have the country restrictions in place ?say a device wifi 5ghz band is restricted to specific country ?any way we can get what regulatory domian my lapt...
hiwe have Cisco mobility express based deployment of 8 APs.7 are AIR-AP1832I-H-K9 / 802.11bg:-E 802.11a:-H one is AIR-AP1832I-C-K9 / 802.11bg:-E 802.11a:-C region is set to china. Some are unable to broadcast the ssids via 5 ghz.though it is showing ...
Hello, I am quite new with mobility express and I would like to configure native vlan on Mobility express management interface. I used the following command and see that vlan is changed to 10. (Cisco Controller) >config interface vlan management 10 B...
My access-point stopped join ME Controller. I manually configured a date with an older year and added config ap cert-ignore enable for both MIC and SSC. They join for some seconds and then stops. Here are some datas: (Cisco Controller) >show auth-lis...
How can we enable Carrier aggregation in Cellular Gateway..CG-522EHow do we get the firmware upgrade for the Embedded Sierra Wireless Modem from Cisco.
Ho Folks. I'm doing a degree work and I have some gear here to make some tests, but failing... I bought a Cisco AIR-LAP1142N-E-K9 on ebay and using evaluation version of vWLC. I have already tried two various versions of vWLC: Air CTVM-7-3-101-0 and...
background:1852I in ME mode. 1702I flash to correct version as matrix list.from 8.10 , 8.8, 8.5 , until 8.2used JPN , JF10 until JC15.both have the problem on 1702I joined in vWLC on 1852I, "%DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to xxx....
Buenos dias comunidad!En esta oportunidad vengo a solicitarle de su ayuda en lo siguiente: No puedo conectarme a la WebGui. Desde las opciones del APP via comando pude constatar que la opción de Web GUi está habilitado tanto para HTTP como HTTPS, sin...
