Wireless

We have a Cisco WLC 4402 running version 7.0.253.3. Does that version support the ability to setup OfficeExtend. Hopefully this would allow me to setup an AP at my home that would always be connected to my internal network here at work. I can do the ...

Hi, have an issue with HA 5508 running 8.0.140.0 and ipads dropping wifi.  When it happens the end user has turn off wifi and turn it back on to be able to reconnect to the SSID.   We are not doing client load balancing, session timeout is set to 288...

Hi all, Looking for some guidance. Due to network consideration I need to apply 1x /22 and 1x  /24 dynamic interfaces in an interface group.My understanding is that the WISM will assign clients to a VLAN/Dynamic interface on a Round Robin basis. Ques...

Table 1 Cisco Catalyst 9800 Series Wireless Controllers Release Compatibility Matrix1Cisco Catalyst 9800 Series Wireless Controllers  Cisco IOS XE Gibraltar 17.1.1s->Cisco Prime Infrastructure 3.7.1    

 Hello Folks, I am trying to copy paste commands from notepad template to Cisco 9800 IOS-XE WLC, but device is looking for user interception by entering Y/N, is there any way to overcome ? ------------------------------Commands from template---------...

There is a rather annoying error in my AIR-WLC2112-K9. I upgraded to 5.1.163.0 and I changed 'ap-manager' and 'management' interfaces to untagged, but nothig helped. The only port that is connected is port 1.The error is:*Feb 10 20:24:47.744: %SIM-3-...

Hi Folks, im new in wireless security portion and i have question regarding the behaviour of captive portal (Guest Wifi). Since it is an open authentication, i have case where an intruder  run a script, perform IP scan, then later on acquire a mac wh...

I went through Meraki documentation on how to create a NetworkAccessPolicy for 802.1x through API and I could not find the API. I could only find the GET API. I can create though dashboard - but I am looking for the REST API format for POST for this....

It looks like there is no real need to enable "HA SKU secondary unit" on the backup controller, since I could just simply add the same amount of licenses to both WLCs since my APs will only be joined to 1 WLC at a time? Am I correct? or am I misinter...

Hi everyone,I just wanted to share a recent experience that may avoid you some headaches. Last november we upgraded one of our WLCs from 8.2.166 to the still (Feb-18-2020) recommended version 8.5.151. A couple of days after the upgrade some users sta...

Please attech the files  (Cisco Controller) >debug client 74:e5:f9:ac:8c:bc(Cisco Controller) >debug aaa events enable(Cisco Controller) >*radiusTransportThread: Feb 14 00:18:32.224: [PA] Vendor Specif Radius Attribute(code=26, avp_len=58, vId=311)*a...