Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
I'm sure, in Prime 1.1 inventory reports it used to give the name of the switch that the AP was connected to. Now, the report inventory offers no such thing. How do I get Prime Reports to give me an inventory of our AP and the switch port they are ...
Hello all, I am trying to set up CMX cloud with a 2504 WLC (version 8.3) I use the following command for WLC to learn CMX IP address... (Cisco Controller) >config cloud-services server url https://text.cmxcisco.com 54.148.174.163 but after every rebo...
Does anyone have any documentation on the functionality of the devices in the swim lane (DRC, GGSN and ARG). Basically, I need to know the traffic flow from box to box and how it all works to deliver internet service to the end user.
Resolved! WLC Bandwidth Shaping
Hi, I don't understand the differences between limiting the data rates on a per-user basis, versus limiting the data rates on a per-SSID basis. Could someone please provide me some practical examples to help me to clarify ? On a per-SSID basis scena...
Hi All, I have a customer who want to use a 1852 AP w/ Mobility Express as a bridge and also have the 700 AP be compatible with the 1852. Would they have to have the 1852 w/o the mobility express in order to accomplish this?
Hi, i have a setup of 4 8540 WLCs , their are devided into 2 pairs in SSO HA , one is locate in the LAN and the other one is in the DMZ. the DMZ pair is set as the Anchor controller. we did switchover test today, and when we did a failover in the L...
Hello everyone, I've got 2 Aironet 1832i with one running as the Master. I'm trying to disable HTTPS for the Web-Auth portal captive web page on a cisco Aironet 1832i with the following command that I found on forums/documentation : "config network ...
Hello,I have been working through the creation of a Guest portal using ISE 1.2 and WLC's version 7.6.There is a foreign WLC and an anchor in this scenario, both are 5508 devices.I have created a new Guest Wireless SSID on both. I am doing Layer 2 MA...
Hi everyone, Does anyone know of some tool to measure the MOS (mean opinion score) for Lync voice services? I know AirMagnet can measure it but I don´t have any laptop or tablet with AirMagnet installed. Thanks.
Hello, I am trying to troubleshoot cisco 7925G phones. Some of the phones " leave the service area unexpectedly" I have seen all the bugs related to it, we have upgraded the firmware to the newest version but the problem still persist. Today I have ...
Hi, I can't enable the 5Ghz radio on the AP AIR-AP2702I-UXK9, can't configure on root, can i change the -UX domain to another where i can use the 5GHz radio ? Also i'm getting a extreme low speed performance on 802.11ng clients. ap(config-if)#stati...
Hi, I haven't encountered this problem before. On my WLC 2504 I've tried now software versions 8.0.100.0, 7.6.130.0 and 7.4.121.0 (as per recommendation from other supportforum-posts), but still get this debug error when I'm trying to join ap models ...
Hi alli have a network that am trying to fix , i have 1 switch SG-300 as a layer 3 network and a modem provided by the service providersee attachment. vlan 1(192.168.100.1) vlan 2(192.168.101.1)now my problem is the modem is acting as a gateway and a...
I cannot reset to Factory Default Cisco 2504 WirelessController or Save Configuration. I telnet to device and use "reset system" command or hold reset button but it doesn't work. I can't connect to device via Console Port Any one Help me!!!
I am a contractor for a company, that has upgraded their access point to a newer model, and they want to factory default their old AP's before donating them to a local school district. (Around 300 to 400 Access Points) What is the easiest way to do t...
