Wireless

Hello. I have created some northbound trap receivers on ncs prime and these are operational status down. Version 1.3 of prime. Any ideas on what this means? Thanks

GreetingsIm trying to activate a guests wirelles at the office with web authentication via a Radius Server, currently we use the Radius Server to authenticate the user off the corporative WLAN with the 802.x protocol. My question is, Can i use the sa...

If you Have a WLAN template set up is it possible to set up a schedule to run the Template or would it have to be done manually each time?

I have downloaded the Web Auth Bundle from Cisco to allow us to customize the Web Authentication page that is presented from our 5508 controller.  Our web developer added two .css files and a .js file for formatting purposes.  If I include these file...

We use PI 3.0 for wifi monitoring. APs (mainly 1131 and 2602l) are controlled by Cisco 5508 WLC. We need to know immediately if the certain client (MAC) associates with certain AP. In PI we see the client information that is about 5 minutes old. Is t...

hi,i just want to ask how i can do password recovery with my wireless controller without erasing the configuration

It's a fairly new product and the cost is almost half if compared to buying a full-blown WLC. Any experience working with it? I'm planning to use it for our new office.

 I am not able to see my wifi router( beetal) in available networks, whereas i can use it in my tablet, other laptop and cell phone. why it is not showing in my laptop?

Hi Team, I have Cisco prime infra 2.0 and i would like to collect the access point inventory from the tool. Please help me to pull the inventory. Regards, Abhijit Kasarekar

Hi, allThis is my first post to this community. I'm planning to setup a Guest Network using WLC, but we have only a single controller. I searched the community and read some posts about placing a WLC in a DMZ and establish an EOIP tunnel to the ancho...

Hello Experts, I have Cisco WLC 2500, with code 7.4 . I want to join AP 2702i to the WLC, i have given static ip for my AP.   but it is not going to join process.   it gives bellow messages on the console and not joining wlc: (Translating "CISCO-CAPW...

annoying traps from WLC with code 7.6.130 ,Client with MAC address has joined profile , traps are disabled still getting the traps fro wlc.

Hi, I have Cisco WLC 2504 and for the first time I am configuring it.  I have configured the WLC, connected the AP 1702, now the next thing is to configure the AP for user & dhcp pool.  kindly help me to configure the further settings.

Hi everyone!  I want to create an account of username and password for each client who are going to access the SSID, can I configure the internal RADIUS server in Cisco 2504 WLC and how many user account supported by internal? it will be appreciated ...