Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

I am having issues with clients re-associating to corporate network after Aging time expires, once laptops are connected the first time (through AD group that I place laptops in it). We are using ACS, under Windows EAP settings, Machine Authenticatio...

Any ideas what this means?Nov  2 15:53:42 c1-145-ap 42: AP:000d.28f2.31ea: *Nov  2 22:53:40.582: %CAPWAP-3-CAPWAP_PAYLOAD_TOO_LARGE: Attempt to send capwap packet with payload exceeding max size. Payload Size: 2057, Maximum Allowed Payload: 1700Nov  ...

Is there a way to limit the maximum end time Lobby Administrator can set while creating guest accounts in WCS? I understand there is a 35 week limit by default however we'd like to limit this to a maximum 1 week.

Hello,We have WCS ver 7.0.230.0 and we were wondering if there is any way to audit our controllers against templates.  We had about 10 controllers already configured before we got WCS and we'd like to see how far off from our standards that they are....

ecornwell by Level 2
  • 408 Views
  • 0 replies
  • 0 Helpful votes

I have an Aironet 1231G that I'm trying to recover an image on. I'm following the cisco directions of reloading the AP image file from an active TFTP server (which is myPC). My PC has a static ip address of 10.0.0.2 with the TFTP server running. I've...

Jim Obert by Level 1
  • 875 Views
  • 2 replies
  • 0 Helpful votes

Hi,After a wireless network interruption, one of MAP 1522  it's  not joining to WLC .What should I do to solve this problem?Thanks.(Cisco Controller) >show ap join stats detailed 00:08:30:bb:53:20Discovery phase statistics- Discovery requests receive...

If you deploy a Cisco 1242 a/b/g access point as a rogue detector, can this be used for 802.11n wired detection as well.i.e Will the controller send the MAC addresses of the 802.11n clients and APs.http://www.cisco.com/en/US/tech/tk722/tk809/technolo...

Hi,I've got a question concerning the configuration of multiple AP manager interfaces on -for example- a cisco WLC 2504. I've read the configuration guide but I'm not sure whether this is the way the protocol works. Say I want to distribute AP's (and...

Hello all,We are running WLC's with software version 7.0.116.0. At the moment we have the internal web auth login page set with some customization serving a guest WLAN we have running. We now need to provide a different guest WLAN but that needs a di...

Currently I have a WLC 4404-100 and 96 nos. LWAP 1250 installed at site. I need to add CAP1550E (4 Nos.) to this existing setup. Out of this CAP1550E, 2 needs to be configured as root, and the remaining 2 has to be connected through 802.11a/n backhau...

We recently did a forklift upgrade on our campus and installed 3502i's, 3502e's, and 11 5508 WLC's. Our students are complaining about slow connections in several areas of the campus.In our testing and basic trouble shooting our Apple laptops have no...

rschwart by Level 1
  • 3253 Views
  • 14 replies
  • 0 Helpful votes

How can I configure a WRT54GS to work bypass mode (serve internet access from the main Monowall router).Actually the  WRT54GS takes dynamic IP by ethernet (lan IP family) and serve wifi by another IP private family.I need the wifi client take same IP...

All,I have a bunch of 1242AG access points that I'm pretty sure are expensive paperweights now, but before I toss them in the tech graveyard, I was hoping to get some second opinions or possible remedies on it.Basically, on all these units (5 or 6), ...

Review Cisco Networking for a $25 gift card