Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Hi ,I have 1042 Light weight AP and i want to convert it to Autonomous mode . i dont find any particular image for this conversion ..when i try to find autonomous image for 1040 its showing "c1140-k9w7-tar.124-25d.JA1.tar"........can i use this image...
hello i have a question. I am just started with testing cisco prime ncsi have worked with cisco WCSnow i was wondering wat the difference is between these two can someone please explain it.thanks allot
Hi, Has anyone installed NCS 1.1 evaluation software on VM ? The spec says you need minimum 200GB hard disk, is this mandatory ? or can i install in a server with 50GB hard disk space for the evaluation version ? Also i am assuming you installe...
Folks, I am testing the Universal briodge feature. When I configure two access points (root/wgb) everything works fine. When I go to the WGB and add the universal command. I get the message that since no clients are associated it will use BV...
Hi Valued Professionals,Can someone please verify the traffic data path for traffic on a non-FlexConnect SSID that is sent from a client of AP1 to another client of AP1 on the same SSID?1. Is it bridged locally by AP1 to the receiving client on the s...
Hello, I need to upload a separate web authentication login page for a guest SSID to be used at our branch office with HREAP APs.I have read that the bundle should contain a login.html file and I can add other login files and choose it under the WLAN...
Hi All, we are trying to import CA certificate on four WLCs for guest web authentication. We already have one CA certificate with common domain domain which all WLC use the same domain. so I need to import cert with WLC private key. is it possible to...
Hello,I am tasked with configuring a 2504 wireless controller. Is it possible to assign an SSID to an interface that has dynamic ap management enabled?Scenario:Location1:1) 10.0.0.0/242)192.168.0.0/24 DMZLocation 2:1) 10.0.5.0Both locations are rout...
Is this supported, or will it be available?GS
Hi, I'm hoping someone can help me out here. I am trying to connect to the WCS database using SQL reporting services and I continue to get a connection failed response. I don't know if this is due to a bad user/pass or what. In an effort to troublesh...
AP '20:37:06:a4:84:40' with static-ip configured as '10.10.139.34' has fallen back to the working DHCP address '10.10.138.75' Any Idea what the error about??
Does anyone know if there's a trick to this?According to the documentation, I'm supposed to be hitting the Esc key when I see the Loading "flash:/[imagename]" ####### ... line, but this doesn't seem to be working. I've tried hitting the Esc key a lo...
Hi, Have a few question fot the wireless 802.11 and the broadcast packet handlingI customer have a problem using the ap1142.First is the arp broadcast packet . The customer network design is the BB-POE/SW-AP-Client.When the BB clear the client ip ad...
i have controller 5508 i configure vlan 10 for guest and name guest-interip 10.0.10.2/24default gateway 10.0.10.254 ( ip address fo core switch)dhcp server ( 10.20.10.10/24) ( ip dhcp server is the same ip for DNS server )i create ssid name gest and ...
I have had a (small) wireless network running in my house for several years but increasingly have the problem that one desktop which connects via a Linksys WUSB54G v4 wireless adapter will connect (associate) with the router but have no internet acce...
