Wireless

Only getting 9-10MB of throughput on the Cisco OfficeExtend AP600's. I have a 25mb pipe, and when I use another router, and even a Linksys I'm able to get 25MB downloads. Let me also clarify that I'm using the personal / local SSID of the OfficeExten...

We have a 2100 controller with 4 wireless AP's, only one connected directly to the controller. I want to use the controller for the DHCP server for Guest, thermostats, in house wireless networks on this system. I cannot seem to get the DHCP setup pro...

Hello all,I am trying to convert an 1142 from lightweight to autonomous.  I've found this post:https://supportforums.cisco.com/thread/2055997However the following command is not available via the CLI: archive download-sw /overwrite tftp:// Any though...

Any ideas how to make the Ascom work with the latest IOS with the Ascom using a static ip? Works fine on older IOS but not the new one. Thanks in advance.

I have an interesting problem. My connections to the guest wired access drop consistanly every 1 -2 minutes. There are no drops in the mobility between the WiSM and the 4402 anchor in the DMZ.  DHCp is served from the 4402 DMZ controller as well as t...

I have as close to a Cisco text book design as you can get.  Guest anchor controller in the DMZ, and a 16 internal foreign controllers in the network.  After adding a controller to one building for a backup (the building only had one controller) I ca...

HiI'm using a wlan controller with 1242ag converted to lwapp, i'm trying to enable 5.8 but when i change the from local to bridge the lwapp disapear from controler. Someone told me that the firmware does not support mesh !I'm folowing the 4402 wlan m...

HI GuysHope you wellI am currently supporting an engineer onsite remotely  and have come across a strange problem .I have installed a few controllers but none of them have behaved in this manner.The  model is a WLC  5508-50k9 model wireless controlle...

Hi AllI have a customer who wants to have the PC wireless NIC card disabled if an ethernet cable is plugged into the PC and is active.Does anyone know if this is possible or if there wireless client utilities that do this?Thanks as always.Roger

Hello.We've dual-band APs (802.11a/g/n & 802.11 a/b/g/n).Do WLC and WCS count such AP as a single AP or each band as a single AP?Thanks

Hi Guys,we have a cosmetic problem with our WCS.We can not save the changing direction of the antenna up or down in Wireless Control System System?If we change the Elevation value from "down" to "up" an click on "save", the old value "down" will be p...

Hi there,we´re trying to configure web auth fo wireless users using WLC and ACS.About that, is it possible to make a website for the users to change their password whenever they want? Does Cisco have any tool for this?Thanks

Hi we are running WCS 7.0.164.3 and wonder whether is there any reporting option availabel that can  give us daily report on Top 50 or Top 100 APs by client count.I know that I can look at the client tab under WCS home page and see the top 5 APs by c...

Hi,I have a wireless deployment consisting of 2 WLC's centrally located in two data centres, with WCS managing the WLC's.  There are currently two sites with wireless.  Each site is it's own AP Group with different SSIDs at both sites.The site where ...

Hi Friends.I have an  issue in my office  on Wireless AccountWe have 5 Cisco (1242AG) Wireless Access points (AIR-LAP1242AG-A-K9) Connected to 1 Wireless Lan controller 4402 in  1 Siteone user Wifi account alone keeps on disconnecting & connecting au...