Wireless

When using autonimous AP migration template it fails to load image...when using WCS server as TFTP server  - all works fine when I use an external tftp like my pc... checked all settings / paths on WCS - all seems fine ... Also WCS managed to backup ...

Hi,We have a site running 2 1131AG access points on different floors with the same SSID.There have been issues with connections dropping over the last 2-3 months to some newer laptops and iphones that have been introduced to the network. It is almost...

Hi,with the WCS should I install both the EXE file and the BIN fil or just the BIN file?Also, for upgrading the Controllers where can I find the ER file. I have downloaded the 4.2.209.0 image but, can't find the 4.2.205.0 ER.aes. Does anyone know whe...

Hi,I have installed WCS 7.0 now i have installed Navigator on WCS server.Installation is completed.but when I check the status of WCS, it says "healthmonitor running with errors"any one knows what could be the problem and how much will that effect on...

Upgrading to a New Software ReleaseHi,I'm planning on upgrading our wireless lan controllers and WCS. I would like to upgrade the controllers to 4.2.209 as our 1020 APs will not be supported by any later version, I think. And, I would like to upgrade...

Our customer has a WISM, 1142 APs and 1252 APs and need to troubleshoot periodic client connectivity issues in certain locations. Can the WISM aid in this (if so, how--i.e. reports?) or is WCS absolutely required for this purpose?

Hello,We've recently sold and implemented a wireless solution using a WLC, WCS and 1140 APs.There is a HQ site where the WLC, WCS, DNS and DHCP reside. Active Directory and a RADIUS server are also located there. There is then a WAN link to remote si...

Hello,I wonder if you can help.  I have setup a PEAP authenticated WLAN system using Cisco LWAPP / WLC with authentication being controlled through Windows 2003 IAS.  All is working well but I want to make this setup more secure. At present non-domai...

I need to migrate live APs from Autonomous to Lightweight using WCS latest ver 7.0.164 - I manged to do a sample migration using template. Does anyone know what is the limitation on the number of APs that can be migrated at once? I know that the only...

There is problem with both external Wifi after power gets fluctuating Access Points not reachable through the network then we have remove power cable from Power Injector wait for 2 min and then plug it again. Then it will become on-line.Please guide....

HiCan any one guide me in the right direction. I need to create a wireless profile that only allow internet access to who connected to that pofileregardsIsaac

HelloWe have updated our DHCP Server from windows 2003 to windows 2008 r2. Our problem is now that we do not get an ip address from our dhcp server for wlan clients. Clients with cable get address from the same dhcp server and scope.Thank you for you...