Wireless

Hello,I have a remote control sendingUDP packet ->src:172.17.1.173:1065 dst:255.255.255.255:30718 But the recepter (on wire network) do not receive anything.Both are on same subnet -> 172.17.1.160/28We do not use any ACLidea why?Many thanks for your ...

I have got two wlc 4402& 25 accesspoint in that ten aps are 1020 & rest of them are 1242G .In the joining process one ap is being able to get an ip address from the dhcp but after that it gives me an error "*Mar 1 00:00:38.332: %DHCP-6-ADDRESS_ASSIGN...

I have a AIR-AP1121G-A-K9 Access point that we are configuring with a cisco ACS 4.2 server pulling from active directory. Currently we authenticate fine but we can't get a DHCP address. The code on the ap 1121 is c1100-k9w7-tar.123-8.JEA. We a vlan 1...

Why do my LAPs continue to broadcast WLC Discovery Requests every 30sec even though they are already associated to a WLC and have static IP addresses?

Hi. I've got experience of configuring 1131's and 1242 access points, but im having a little bit of trouble getting the wireless to route properly on my 877W.Basically I can connect to my wireless, but I never get an IP address, my DHCP simply times ...

How do you change the date and time in a Cisco 1240AG AP

I is possible tolimit bandwitdh usega for certain IP traffic on 1310 bridge?How?THANKS

Does anyone know anything about CSCsl34076? I found it mentioned in the release notes for WLC code 4.2.99, but other than that it's like it doesn't exist. The description of the bug in the release notes state "Controllers cache only one PMK per clien...

Hi,We are positioning CAR in an SP environment for GPRS.I have read conflicting reports over how many users can the internal database support.My questions are:1.Do you know what type of database is CAR using for its internal users. Is it Oracle or a ...

I have installed and configured 1310 with Sector Antenna of POint to Multipoint scenario with 2 different VLANs and assigned 2 different SSID, it shows the DOT11 Associations with both of the Multipoint Bridges but can't Ping one of the Access Point ...

I have successfully got users to connect to the WLAN using PEAP-mschapv2 (no CA certificate on laptop) but I cannot get machine authentication to work.At the moment I can get all users with diallin tab ticked to connect to the WLAN from a domain memb...

I have installed WLC on my network and using certificate authentication with tkip encryption.Some users are able to authenticate and have access to the domain while others are not.If I log into into the same laptop with my profile,I get wireless conn...

I have a remote AP that initially was having trouble connecting to the WLC for the initial join. For some reason, it suddenly decided that it would join. All well and good, it joined, downloaded the new software, and functioned properly. I had to mov...