Wireless

I reciently tried to upgrade my 1231 AP to LWAPP using the Upgrade Tool 3.0 for Cisco IOS AP's. The upgrade tool stated that the upgrade was a success with no errors. Now the AP boots itself with image c1200-rcvk9w8-mx fine, then states "lwapp_crypto...

Using a Cisco WiSM Controller w/ version 4.1.181.0 to monitor/manage Rogues and Ad Hocs.Wanting to dump the results into a database for management history -If I use SNMP to retrieve the data - which MIB do I use...Looking to get the table/results wi...

What is the trick to get the map editor to understand that a wireless signal on the 2nd floor can be used by people on the 1st and 3rd floors?

Hallo Users,i Have AIRONET Wireless Communications Cisco Aironet Wirele ss 802.11b under OS Debian Etch. This adapter install successfully, but i have no WPA-PSK. Tahnks for answer. Help me!Ralle

Is there a cli to clear/bring the ACS to factory settings? Or do you need the recovery CD.

Upgraded WCS. Was running 4.0.97.0 now running 4.2.97.0. It doesn't start at boot for some reason because it appears that it wants to open a connection to the X11 display. That doesn't exist at system boot. It does howeveer start if you maunually r...

Using WLC 4402 with lightweight access points. Some valid clients are being excluded because of an association failure.Why is this happening and how do you remove them from the excluded list?

A couple people i work with came up with a nice Wireless Disclaimer page that goes over a few rules with a "agree/disagree" button. My question is, does anyone know how to make this functional? I have uploaded it to the WLC, and set it where once you...

The certificate on the Wireless Lan controller had expired. I installed the certificate and restarted the controller. The controller lost the entire user account database. I imported the database from another system and after the reload the database ...

Hi, Just upgraded a few WiSM controllers to 4.2.130.0. After doing so, the CDP name for each access point had .cisco.com appended. All access points are given their domain name via DHCP, on previous WiSM code, we had no problems.Thanks in advance, ...

Hi, i have two WLC 4402 with same ios 4.2.99.0 & configured fail over based on below linkhttp://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml#c5AP failover occurred but the fall back option like prim...

The certificate on the Wireless Lan controller had expired. I installed the certificate and restarted the controller. The controller lost the entire user account database. I imported the database from another system and after the reload the database ...

What is the best way to find out what SSID is configured on a LWAP AP? Either on the controller CLI or Web GUI.Thanks.

Hello,I am in the middle of converting over to a LWAPP infrastructure as well as converting over to using the Cisco Secure Services Client.Because I have a very large number of IOS based AP's still in service that are running LEAP with CKIP, I have a...