Wireless

Hello,We are using AP340 at main office and WGB 340 at remote office. Worked fine until additional clients at remote office, discovered 8 client WGB limit.In an earlier post, it was suggested I upgrade to a bridge. So, convinced management, and purch...

I have two Cisco 1200 Access Points (A & B)with 802.11b radio’s attached to two separate Cisco 4006 switches in a Comms room. AP A is located in one room and AP B in another. The APs are in-line powered from the switches. WLAN has been secured using ...

Has anyone had any problems/resolutions using spectralink phones using release 12.0?

Hello ,I wanted to know is there any client that supports LEAP or PEAP or TTLS.In other words we are trying to use Cisco aironet access points and was just wondering with is the best security policy that can be implemented with 3rd party client cards...

Hi,Anybody know what is the part number for the mounting bracket for Cisco 1200 AP ? I want to buy additional piece.Thanks,Cheers,Toh

What can I do if the 350 Workgroup bridge status LED blinking RED. No wirelless and no lan link.

My Dell laptop has a Microsoft laptop wireless card (MN-520) which connects fine with my wireless network at home.At work we use Cisco Aironet 350 Access Points and I am trying to access that network using the same card. But I have had no luck so far...

On many of my clients I am getting "IP Address: Unassigned". On others in the same area it works fine. Of these all of the clients are Laptops with Agere client adapters inside, or are the Orinoco Gold cards. I think they stopped working when I upgra...

Hello, evryone,Are the following two WLAN network desigs (topologies) correct or no?1. BR350 root -----BR350 non root======BR350 AP mode---------WLAN Clients (Desktops) or WGBs3502. BR350 non root------BR350 root======BR350 AP mode---------WLAN Clien...

How can I make my repeater stay authenticated? When this happens I cannot get to it to program it or debug the network.Thanks!-Jay

I am tryiing to install a cisco aironet wireless LAN using Windows 95 but I can not get pass installing the hardware. Please help.

Hi guys,I have a Aironet AP1100; the users should be authenticated throught the radius server in the EAP-TLS mode or in the open authentication mode.this is my configuration for the authentication in the ssid:! ssid AIR-TEST authentication open authe...

How can i configer my AP 1200 to broadcast SSID on 5 diffrent VLAN's?I succeed to broadcast it only on native VLAN.