Hey Community! I'm excited to share something we've been working on that I think will really resonate with many of you managing wireless networks today. We just released the Cisco State of Wireless Report 2026, based on insights from over 6,000 wirel...
Forum Posts
Hello all, I recently purchased a 1702i AP from ebay, it came with C1700 Software (AP3G2-K9W7-M), Version 15.3(3)JD14.I have attempted to back this image up to my computer using TFTP, but I am concerned I might not have a usable image if I need it in...
I have a warehouse with 7 MR-76s deployed at a height below 9.5m and positioned vertically. The Zebra MC9300 prefers the 5GHz broadcast of the PSK SSID used solely for the RF scanners. There are 3 RF scanners onsite. All guns have challenges across a...
does aironet cisco 1572AC support stand alone mode? Specs say it will be supported in the future? When is that?
Resolved! Catalyst 9800 licensing issue
Could someone please tell me the procedure to register the Catalyst 9800 with the On-prem CSSM server?
Hello,we already use one WLC 3504 pair in HA SSO mode with 150 licenses. Our customer now needs more licenses.What is the usual procedure?We would like to install another pair in the same location.Is there a best practice guide for this setup?Is it p...
Hello,Using DHCP option 43, which interface on the WLC should I direct the AP towards so that it can connect?Service port or Managment port?Also do I need to enable anything on the router interface to allow initial discovery traffic from the AP to re...
I noticed when AP tries to join WLC it fails and when I see the logs the error msg is show below:No more AP manager addresses remainNo valid AP manager found for controller 'VWLC' (ip: 10.200.1.30)Failed to join controller VWLCFailed to join controll...
Hi All,please help and suggest. i have create a test lab before execute live envirment. iam faceing issue client system disconnect from internet within 1-2 min. below find log from AP & wlc. can you suggest what was the reason. as i checked log fro...
Hi everybody.I have WLC 9800 (17.3.3, 17.3.5b, 17.6.3) and ISE 2.7 and WIndows clients.Authorization in the ISE occurs using PEAP-TLS. (eap-tls + ms-chap v2)There are 2 different rules configured on the ISE side.When connected, the computer is subjec...
I am already having a FortiWifi Device and it is providing IP to my Wifi SSIds.Now as i have bought a new cisco AP,I need to add this and want that to take ip from the Forti wifi interface which is configured as tunnel already.I am attaching the scrr...
The configs on this AP are exactly the same as the other 12 APs we have on this floor and I can see it in the controller when I console in. I go to mount it and it's boots up red/green endless flashing. When I have it mounted I don't see it on my WLC...
Do I need to have both bands 2.4GHz and 5GHz enabled for WiFi 6 to work properly.Please note that my question is regarding WiFi 6 and not WiFi 6E.If i have an area which I have disabled 2.4GHz due congestion and left only with 5GHz enabled then * Wou...
Hey all.Im trying to config SSID 802.1x with policy map on ISE and profilling change on WLC. WLC - 9800CL - 16.12.4aISE Version: 2.7.0.356 I'm having trouble figuring out which attribute is needed in the "ISE policy result" so that the WLC controller...
Good Morning (in my part of the word)!I have 5520 controllers on 8.5. I'd like a list of APs and what channels they are on. I can;t find this anywhere in the controller or Prime Infrastructure. I can write a script to brute force this one AP at a ...
Can a 5520 controller present its own guest authentication captive portal for client auth without needing to use the likes of ISE to present the portal? The WLC would still use Radius to auth the entered credentials.
