Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Another case of AP's not joing at the WLC ...The WLC is remote, virtual, 8.3.150.0 (but not upgradable due to some old ruins still present)All the other branches work fine, but from this one this can'tI just attach a couple of debugs, if someone more...
I'm trying to get a report of DFS events on my APs. Is there a way to create a custom report on the DNAC for this? I looked and did not see any way to customize the templates. Am I missing something or will it just not do this? DNAC Version 2.2.3.4
Hello guys,i have a little problem and i hope you can help me.In our Office we use 4 Cisco AIR-AP1852E-E-K9 where one of them is AP and Controller (Mobility Express) at the same time.We deployed one WLAN where everything works fine and the Clients wh...
We are running 17.3.3 and we have a mesh setup between two 1572 APs, one root, and one mesh. We need to have Ethernet bridging enabled between them. I have created a Mesh Policy that has Ethernet Bridging enabled and VLAN Transparent disabled. I c...
hello and sorry for my english, Yesterday we had trouble to connect payment terminal to my wifi, nothing to do, the terminal don't want to connect to the wifi and exactly the same with an other terminal. I have no trouble with computers on the same w...
I can't find how to change EAPOL-key-timeout for an AP running EWC 17.7.1 Either CLI or webui OK, real issue is that I have a couple iPads that won't connect to our network (3 out of 200), the initial handshake sends M1 and M2, and then repeats, ne...
Dear All,we have disabled P2P Blocking on one of our SSIDs to enable Peer to Peer communication for a programming project. Our professor who is managing the project told us the clients will only see each other if they are in the same RF band. That is...
Virtual WLCversion : 8.10.151IP : 192.168.41.100 APPID: C9130AXI-KIP : 10.0.15.251AP6C71.0DF2.5B94#ping 192.168.41.100Sending 5, 100-byte ICMP Echos to 192.168.41.100, timeout is 2 seconds!!!!! AP tries to join with WLC but gets "AP Join Request fai...
Virtual WLCversion : 8.10.151IP : 192.168.41.100 APPID: C9130AXI-KIP : 10.0.15.251AP6C71.0DF2.5B94#ping 192.168.41.100Sending 5, 100-byte ICMP Echos to 192.168.41.100, timeout is 2 seconds!!!!! AP tries to join with WLC but gets "AP Join Request fai...
how to solve so that the led lights on the Cisco Aironet 2802i device don't flashgreen, red, and blue, after a few moments it turns back to normal blue
Greetings,we are implementing a wireless project using 9800 wlc but because of Cisco's ridiculously long delivery times we used one of our APs as a EWC. now that we have a vWLC we associated the APs to the vWLC but the EWC is causing problems. some o...
Hi,I have deployed 9800 WL controller and connected the access point is 9120 AXI, the access points are installed top of the ceiling, and All users are sitting nearby access point,The problem is users are facing disconnection issues and Microsoft tea...
Hi, C9800 wlc use internal dhcp for each clients. All clients use the same dhcp server. Why some clients get Infinite Lease Expiration and other get finite lease expiration? Please see the below screenshot. Thank you
Hi guys,I have a 10 of these access points that apparently came from a working enviroment!I am trying to access the web interface on them. I have factory reset all (holding reset button for 30sec). The first unit I plugged in, I successfully accessed...
Hi In catalyst 9800 wlc, there are two ways that I know to configure dhcp for wifi user. One is to configure dhcp server ip address in policy. Second is to add ip help-address in its vlan. However, I notice Guest wifi can work well, but the two ways ...
