Hi All, We accidentally used the C9800-40 17.12.5.bin file on C9800-CL model in Install mode. While the package got created, the upgrade failed for obvious reasons. We copied the right image once we realised our mistake, but now it doesn't let us cre...
Forum Posts
Hi!We are a small science institut having like 35-40 Cisco access points that are connected to the near-by University and their Cisco Wireless Controller (9800-40-A?). However, some of those APs do loose their connection to the WLC or cannot find the...
Controller: 9800-80S/W Version: 17.9.5Issue: Wireless guests on open SSID are not getting COADescription: Our wireless infrastructure is made up of 15+ wireless controllers. Right now we have a mix of 9800s, 5520s, 8540s using 2800, 3800, and 9166 ac...
お世話になっております。以下の脆弱性について影響を受けているか確認しているのですが、https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-wlc-file-uplpd-rHZG9UfCWLC#show running-config | include ap upgradeWLC#コマンド結果は上記の通り、何も表示されず影響を受けていないものと判断したのですが、#show ap ...
Hi team, we have installed c9800 HA pair 2 months ago, running 17.12.4 version. We are facing now random reloads of standby WLC every few hours with this info: Reload History: Reload Code: ReloadReload Description: Reload Command - RIF: Bulk Sync, sy...
In WLC, user is moving traffic from One AP to another AP. Probe request/probe response ?Authentication request/response will switch between APs ?Association request will be switch between APs.
Hi all, We have 9120 running EWC 17.6 firmware version. We are trying to implement EAP-TLS on client laptops. Below is the customer setup1) Windows server running AD and CS services2) Windows 11 laptops / Windows 10 laptops3) Aruba ClearPass4) Cisco ...
Hello All,We had several disconnections on wireless clients connected to one of our Access Points. Actual placement Map was like we have an AP over the ceiling mounted to provide coverage all over the region but this AP has a different RF group and p...
Hi All, We have a Cisco WLC KUL-WLC AIR-CT3504-K9 on our Europe site and we have a deffective Cisco Aironet 2800 Series AIR-AP2802I-K-K9 access points which is already EOL. I want to replace it but do you have any suggestion for a model that is alm...
While configuring an estimate for the CW9172I access point in Cisco Commerce Workspace (CCW), I encountered an issue during the licensing selection step. When I attempted to choose the LIC-CW-E (Essentials) or LIC-CW-A (Advantage) license, the system...
Hi All, I have 8 APs in 4 Branches. 2 for each. Can we control those APs from an EWC that was setup on a one site instead of using a seperate 9800 WLC ? Thanks
Dear all, I have a problem with C9115AXI-S convert to EWC. This is my running-config, when I disconnect PoE LAN cable and reconnect again, I cannot ping IP in EWC. Everything is fine before disconnect PoE LAN cable ( I can ping, setup WLAN,...)interf...
I have 18 Cisco 140ac access points in one of my schools. I am having problems with some of the APs unjoining and then rejoining. When this happens, the unjoined AP shows as "Mesh Extender", then that goes away when it rejoins. I don't have Mesh E...
Resolved! APs are not updated via c9800
C9800-clCurrent version 12.17.03 updated about half a year ago. Decided to update now. When updating to any version, two points (AP4800 and C9105AX) are not updated. The status is download and a cyclic reboot occurs. If you return c9800 to 12.17.03, ...
We bought APs and WLCs with essential licenses but when we loaded the token an alert appeared in the Smart account saying that we had "Insufficient Licenses" for Aironet DNA Advantage Term Licenses and AP Perpetual Networkstack Advantage. we don't ev...
