XR OS and Platforms

has anyone verified or tried this?   i'm working a case and it just will not establish the neighborship. using bgp and it's in a vrf (should be irrelevant) the bgp neighborship comes up - the bfd neighborship does not. thanks in advance! nexus versi...

I'm looking for the Visio Stencil for the line module "A9K-2T20GE-L" anyone know where I can get it.  Not in the Cisco stencils for the ASR 9000

Hello team, is it supported to filter traffic based on source MAC address on L3 interface (e.g. on interface Bundle-Ether 1.1)? Platform is ASR9k. Best regards, Josef

Hi, I had tried telemetry with XR 6.0.1. Read the presentation [http://d2zmdbbm9feqrf.cloudfront.net/2016/usa/pdf/BRKSPG-2069.pdf] and trying to see if I can experiment model based telemetry. I am hitting the following issues: [1] The telemetry com...

Hello. I'm working in an ISP where the CGN is implemented. We have PRTG installed on one of our servers. What i want is, PRTG will be able to get "CGNAT active translation count" from our ASR 9006 (IOS XR 5.3.3 sp1) router via SNMP.  I cannot find...

Good day, Can You help with this ? Our ASR 9006 shows this message sc_reddrv[386]: %PLATFORM-REDDRV-7-ROLE_CHANGE : Detected role change to ACTIVE state due to mastership release. What is the reason and how can we solve this? Thank You

Hello. I'm working in an ISP where the CGN is implemented. We have PRTG installed on one of our servers. What i want is, PRTG will be able to get "CGNAT active translation count" from our ASR 9006 (IOS XR 5.3.3 sp1) router via SNMP.  I cannot find an...

Hi, Very little information appears to be out so far regarding RSP880-RL-TR (Shockwave RSP4S i think is called?).  What is the minimum supported software version for the RSP880-RL-TR and RSP880-RL-SE? Would this work on XR version 5.3.3, or is 6.0.1 ...

Hi,  Is there any config that can suppress messages that are send to log server ? This config that i found suppress messages in buffer , but i need also to suppress messages that are send to log server .  RP/0/RSP1/CPU0:Jan  7 15:12:48.496 UTC: ip...

Hello I am trying to understand the ASR9K combines QoS in a hierarchy that has multiple PPPoE subinterfaces. In the network setup we PPPoE subscribersand for all of them we need to provide LLQ for VoIP traffic (upto e.g. 150kbps priority). The proble...

Hello team, customer asked me if IOS XR (e.g. ASR9k) supports this configuration:  router bgp 1234   neighbor 1.2.3.4 remote-as 5678   neighbor 1.2.3.4 route-map MAP out!route-map MAPA permit 10   match ip address prefix-list PREFIX   set next-hop 1....

Hello guys! I'm trying to apply autoroute annouce command to PCE initiated LSP by using Configuration group command but without result. It doesn't work. Autoroute disabled for pce initiated LSPs. May be I do smth wrong. Please help. Or advice anothe...