XR OS and Platforms

Hi Folks, I am trying to establish ospf neighbors between a ASR9K and ALU 7360 but the session goes to full and then init immediately thereafter. It looks like a LLS interop problem but I can't find how to turn it off on the ASR. Any help would be a...

Hi, While trying to upgrade IOS XR from 5.1.3 to 5.3.3 , I am getting the following error. Please find the below error which we are finding while  activating the 5.3.3 mini pie file.   RP/0/RSP0/CPU0:LAB-ASR-9006#admin install activate disk0:asr9k-...

the question is could I have a AAA server per line-card, though I think it's possible to have AAA server per-SDR but aint sure!  thanks indeed 

Perhaps this is best as a TAC case, but thought I'd ask here as well. I've upgraded to XR5.3.3 and having trouble with recommended SMU CSCux24553 and then CSCuy71556. CSM says 24553 is recommended and 71556 is optional  - although both issues look si...

Hi all, I wonder if is possible to issue a command that show the number of the policer configured per interface on a Cisco 7600. For example using the command: sh policy-map interface | in Giga|Ten|Service-policy|police|cir|Class-map GigabitEthernet7...

Forgive me if I ask several questions in this forum in the next few days. I have a ASR9K try and buy which means i have no service contract to open tickets so please bare with me. I can't seem to get my serviceinfra and serviceapp interfaces to come...

Hello guys! As the title says im looking forward to automatically back up my running config on a cisco CRS-1 to an FTP server. I was only able to find this config example:Configuration commit auto-save filename ftp://A.B.C.D/myconfig.txtThis allows m...

Please  if any one has a document about upgrading  RSP4G to RSP440? thank you

Our subscribers complain about their usages and their credits. The AAA contractor reports that the BNG (ASR 9K) sends RADIUS Alive packet with attributes of "acct-input-packets-ipv4", "acct-input-octets-ipv4", "acct-output-packets-ipv4" and "acct-out...

ASR 9010 (IOS XR 4.3.4), I want to make sure what's BGP "multipath" config implications here.router bgp 17511| neighbor 61.122.240.149  use neighbor-group INTERNAL  address-family ipv4 unicast                     <<<<< we can set "multipath" here For...

Hi, Whilst deploying Inter-AS VPN option C design with BGP ipv4 + Labels between to Autonomous Systems with ASR 9000 IOS-XR Devices i have the following queries It is known that in XR the directly connected host routes of the eBGP ASBR neighbor is no...

Hi, We have ACS integrated with our AD. We have OU Created on AD for RW and RO.   Now we permit show startup-configuration and running-config for RO user. but on asr   Result: Show startup-config Still not allowed show running-config only limited com...