Trending Topics
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
-
Slow speed when connecting to specific VLAN
by dgzbri -
ISE Internal CA issued EAP-TLS auth fails after renewing EAP Auth cert
by MMR16 -
NCS 520 service instance trunk configuration
by Adcom911 -
Nuevo: ¡Los premios Spotlight Awards ahora incluyen a los colaboradores internos!
by Jimena Saez -
Update Catalyst 1300 via CLI
by ewald.jeitler -
Does Cisco donate to approved non-profits in Nj
by fborelli7 -
SNMP Problem
by mohammedalrawiib -
ERSPAN on cisco 3850 and Cisco 3650
by mohamed_afarrag
Community Activity
RA VPN, ISE sending posture compliant DACL to unplugged ethernet intf
Wondering if anyone has seen this issue before. Laptop on WiFi>Firepower(7.2.5) RA VPN>ISE(3.3 with posturing)Laptop will connect to VPN, issue happens on AC 4.10 and Secure Client 5.1.5.65. Once posture starts to run, at 10% mark, it will say compl...
IPsec tunnel with same phase 2 IP addresses
Hi Team, I am stuck in one issue i would like to all please help me to resolve this issue......I have cisco FTD 3105 model with version 7.3.1, from my firewall have configured 2 tunnels for different clients but the issue is both the clients have sa...
Does Cisco donate to approved non-profits in Nj
<top> Looking to see if Cisco donates to approved non-profit in NJ for recreation athletic teams to help burdened the expense of purchasing new safety equipment.
Update Catalyst 1300 via CLI
I am trying to update a Cisco Catalyt 1300 switch - via Web GUI this works perfectly. Unfortunately I have customers where I only have a Linux Jumphost and no access to the Web GUI because it is disabled. So port forwarding via SSH is also not an opt...
Resolved! L3 switch can't resolve fqdn
Hi, I am setting up smart licensing on several L2 and one L3 switch. L2 is working fine, L3 not. It seem that fqdn's can't be resolved.On L3 dns server is set up. There is a transit VLAN between L3 and the firewall. When I specify the source in ping ...
ASA certificate adding sequence
Hi GuysNeed to renewal certificate for vpn on ASA Virtual applince I have chain of valid certificate issued by certigio including wildcard-cert for domain, but every time got error while import the certificate (error in saving certificate, failed imp...
Ho to get the information based on S/N (CWAY the automated way)
Hi there,sorry if I'm not using the right group, in case let me know which one is best.I'm sure all the big Cisco customers have this problem: when ordered items arrive, you want to add them to the inventory. The inventory must have the S/N, the desc...
tftp-bind issue with "hidden"alias"?
So I am stumpped... I enter this command... tftp-server harddisk:/phone-configs/SEP74860B95756E.cnf.xml alias SEP74860B95756E.cnf.xml I get this response... This alias is already being used. Please use another alias There is no aliases in my run...
Resolved! Cisco Room Bar is fully compatible with CMS 2.0 or not
Hi Experts, I hope this mail finds you well.I am currently exploring options for video conferencing hardware and wanted to inquire about the compatibility between the Cisco Room Bar with Cisco Meeting Server (CMS) version 2.x. As I know Webex Room Ki...
Sharefile now not prompting for Password on second login
Hi, Wondering if anyone else has had this issue; We've used Sharefile with Duo for quite a while and it works great. Lately when I go to Sharefile, login is normal with domain creds, then MFA, all good. When I go back to Sharefile later in the day ...
Profile Transitions and the use of Exception Actions
How to avoid mac spoofing in MAB using Profiling Transitions and the use of Exception Actions We have ISE 3.3 Patch 3 deployed for one of our customer. For wired printer we are using MAB. For authentication and authorization, we are using the profil...
Pair of 6880-Xs with strange VSS config
I have a pair of 6880-Xs in a VSS pair with a strange configuration. I wanted to get some opinions before changing anything. The switches are connected by MM fiber as follows:Te1/5/1 <-> Te2/5/1Te1/5/2 <-> Te2/5/2The port states are:Te1/5/1 - connect...
SNMP Problem
hello eveybody we have 2 switches where they have same configuration with snmp and access list but still yet they are not working one does work fine and sends alert while the other doesn't send any alert i tried pinging zabbix there is ping without a...
What is the purpose of Timestamp in ConnectionData.xml file
Hi all;Look at the following figure:As you can see, every primary section has a "timestamp" section. I want to know that what is the purpose of this timestamp?Thanks
WLC 9800 ISE dACL question.
I am trying to get dACL's work in a new WLC 9800 deployment. I have found the following statement but I am not sure what it actually means..Downloadable Access Control List (DACL) will fail if you use a named authorization network method list that i...
