Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello Folks,As per the knowledge i have on Cisco IP Telephony, i strongly believe the calls records (Received, Placed and Missed) are accessed from CUCM by Cisco IP Phone with the help of below service URLs.Missed Calls : Application:Cisco/MissedCall...
I've got the following 3rd party VM set up:VM and analog phones <--> DPNSS PBX <--> QSIG-DPNSS Converter <--> MGCP gateway <--> CUCM cluster <--> voip phonesIn CUCM I have a VM pilot number and a route pattern pointing to the gateway. The VM number a...
Dear All i have an incoming Id problem , it shows me ig the phones " Unknown " number and not number and this happend not always , it happends sometimes , i have E1 with cucm 7.1 , please see the debug below :and give me Jan 26 07:25:20: ISDN Se1/0:...
Dears,I want to confirm that can i controlled to 2 seperate clusters in one ELM. As the name says ENTERPRISE LICENSE MANAGER and also the link says https://supportforums.cisco.com/docs/DOC-34910 but still to clear my doubt from experts.I am having a...
I am receiving complaints that when call into the sites main line (call Handler) and dialing an extension from the greeting. The caller would get "hold music" for a short time, then a voice prompt saying you can not be transferred to that extension ...
Ok guys, so I got this AIM-CUE module on eBay for my CCNA Voice lab and it already included a 50 mailbox license, running Unity Express 7.0Because of a compatibility issue with the rest of my setup I decided to upgrade CUE to version 7.4 and I made a...
Hi,I am currently in the process of designing MPLS network which will carry variant traffic types including voice related traffic (bearer, signaling, JTAPI, CTI, presence, ICCS, etc).I am thinking to create CUCM cluster over WAN by placing servers in...
Hi,Do I need to buy any kind of license with Enhanced UCL for run CUVA on CUCM 9.1? I have been told just need to buy CUVA-CLIENT-UWL license (UCSS). is this true?Thanks in advance.RegardsPlease remember to rate useful posts clicking on the stars be...
Hi,We have FXO ports on the router and SIP trunk towards ITSP. People used to dial into FXO and get the dial tone to callout using the SIP trunk. But after the upgrade of the IOS, this functionality has stopped. Now if you call the FXO, you get busy ...
Dears I installed the CUCM 7.1 (2b) on Cisco UCS B200 M2, and now I need to make upgrade to CUCM 8.5.- How can I perform the upgrade and how can I get the Upgrade files ?- What about the License that I have on 7.1?Note: Environment have 3 Nod...
I'm familiar with the older CUCM release notes that freeFTPD (SFTP) couldn't write a file that was greater than 1GB. I'm betting that has been fixed as of freeFTPd 1.0.12.In the lab I tested using freeFTPd version 1.0.12 and wrote a TAR file (SFTP) ...
Hi,I have a problem with MoH in the test lab. When I place call from any local (internal) phone into the PSTN phone and place the PSTN on hold I hear two sperate streams playing at the same time. One is the CME music-on-hold and the other is the CUCM...
Dear How can I know the License included on the Media Kit of the UCM 7.1 (2b)Know that the P.N of that product is UCM-7845-71-KIT
Dears need your helpnot able to dial the following no9 013 8322299 national callpls find the attached config
Hi,We have a scenario like below:IP Phone--(sccp)-->CUCM--(H323)-->CUBE--(sip)-->ITSPFor outbound calls, the call disconnects as soon any button is pressed during call. So basically, any DTMF digit dialed from the Phone disconnets the call.Here is th...
